Jun Ma
Om
Jun Ma is an Associate Professor at NTNU – Department of Mechanical and Industrial Engineering. He joined NTNU as a postdoctoral fellow in Sept 2019 and was promoted to tenured associate professor in Sept 2021. Jun's research endeavour is more on the design and development of advanced metal forming and manufacturing processes/chains for both mass and customized production, by seeking the epistemological understanding of physical essence in the manufacturing processes/chains for developing innovative solutions toward improved accuracy and properties of products, productivity, profitability, and sustainability.
Professional Experiences
- Associate Professor, NTNU - Department of Mechanical and Industrial Engineering, Trondheim, Norway, 09/2021 - present
- Postdoctoral Fellow, NTNU - Department of Mechanical and Industrial Engineering, Trondheim, Norway, 09/2019 - 09/2021
- Research Assistant, Hong Kong PolyU - Department of Mechanical Engineering, Hong Kong, China, 05/2018 - 05/2019
Research Interests
- Design and development of lightweight and circular products.
- Manufacturing processes: forming/bending, aluminium extrusion, AM, and hybrid processes
- Industry 4.0-based forming equipment, machine tools, and in-situ monitoring technologies.
- Intelligent modelling and adaptive control of processes and production chains.
- Sustainable manufacturing, recycling and re-manufacturing using PCS recycled aluminium
Forskning
AluGreen: Aluminium Green Platform
The AluGreen ambition is to explore, develop, and pilot high value true circular Al products, based on post-consumer Al scrap (PCS) and renewable energy, exported from Norwegian value chains with high degree of automation and skilled workers.
EXPECT: Complex EXtruded Aluminium Profiles for BEV Battery ProtECTion System
This project aims at developing an aluminium alloy optimization scheme for extrudability, crash management, and design functionality of complex multi-chamber profiles seen more and more in such structures.
TaFF: Digitally-Controlled, Toolless and Flexible Forming
This project will be used to develop a toolless forming concept - where the bending cycle can be digitally controlled and adjustable during production to avoid out-of-tolerance parts.
AdaptAl: Adaptiv Control of Aluminium Manufacturing
The overall idea of the project is to develop and demonstrate a product-service-system that integrate multi-physics models, process models, advanced sensors, and virtual data through an optimizing software.
CPS Plant: The Cyber Physical System Plant Perspective
The primary objective is to develop, utilize, implement and evaluate enabling technologies for Norwegian Industries of the future in a combined physical and virtual industrial model built on the principles of Industry 4.0.
Publikasjoner
Jun Ma has published more than 60 peer-reviewed book chapters, journal and conference articles, as well as several patents. Many of them are published in the top-notched journal in the metal forming and manufacturing field, such as Int J Mach Tools Manu (IJMTM), Int J Plast (IJP), Int J Mech Sci (IJMS), J Mater Process Technol (JMPT), as well as the important conferences such as ICTP, ESAFORM, MSEC-NAMRC, Metal Forming. One paper was awarded the "Best Poster Prize" at ICTP2017 at Cambridge University, and several journal papers were listed as "Highly Cited Paper" in the Web of Science. Jun is sitting on the editorial board of several journals such as J Mater Sci Technol (IF=10.32). He is also an active reviewer for more than 30 top-notched journals in the material, mechanical and manufacturing fields, such as IJMTM, IJP, CIRP, IJMS, AMSE, IJAMT.
2023
-
Oliveira, C.M.;
Cazacu, O.;
Revil Baudard, B.;
Neto, D.M.;
Frohn-Sörensen, P.;
Ma, Jun.
(2023)
ESAFORM 2021 cup drawing benchmark of an Al alloy: Critical follow up analysis of its potentials.
Materials Research Proceedings (MRP)
Vitenskapelig artikkel
-
Williams, William Matthew;
Sandnes, Lise;
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir.
(2023)
Yield Stress and Work Hardening Behavior of Extruded AA6082 Profiles under Different Homogenization and Extrusion Conditions.
Materials Research Proceedings (MRP)
Vitenskapelig artikkel
-
Tronvoll, Sigmund Arntsønn;
Treffen, Helena;
Ma, Jun;
Welo, Torgeir.
(2023)
Low-cost tooling concept for customized tube bending by the use of additive manufacturing.
Materials Research Proceedings (MRP)
Vitenskapelig artikkel
-
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir.
(2023)
Prediction and analysis of real-time forces in novel 3D flexible rotary stretch forming of complex profiles.
CIRP - Journal of Manufacturing Science and Technology
Vitenskapelig artikkel
-
Liu, Wencheng;
Huang, Jia;
Pang, Yong;
Zhu, Ke;
Li, Shugen;
Ma, Jun.
(2023)
Multi-scale modelling of evolving plastic anisotropy during Al-alloy sheet forming.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Zhou, Xianyan;
Ma, Jun;
Zhou, Wenbin;
Welo, Torgeir.
(2023)
Forming-based geometric correction methods for thin-walled metallic components: a selective review.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig oversiktsartikkel/review
2022
-
Pang, Yong;
Grilli, Nicolò;
Su, Hang;
Liu, Wencheng;
Ma, Jun;
Yu, Siu Fung.
(2022)
Experimental investigation on microstructures and mechanical properties of PG4 flash-butt rail welds.
Engineering Failure Analysis
Vitenskapelig artikkel
-
Habraken, A.M.;
Aksen, T.A.;
Alves, J.L.;
Amaral, R.L.;
Betaieb, E.;
Chandola, N..
(2022)
Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations.
International Journal of Material Forming
Vitenskapelig oversiktsartikkel/review
-
Wang, Xintong;
Ma, Jun;
Welo, Torgeir.
(2022)
Influence of deformation prior to ageing on fatigue behavior of extruded AA6082-T6 profiles.
International Journal of Fatigue
Vitenskapelig artikkel
-
Lu, Xu;
Díaz, Andrés;
Ma, Jun;
Wang, Dong;
He, Jianying;
Zhang, Zhiliang.
(2022)
The effect of plastic deformation on hydrogen diffusion in nickel Alloy 625.
Scripta Materialia
Vitenskapelig artikkel
-
Tronvoll, Sigmund Arntsønn;
Ma, Jun;
Welo, Torgeir.
(2022)
Deformation behavior in tube bending: a comparative study of compression bending and rotary draw bending.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig artikkel
-
He, Xu;
Ma, Jun;
Welo, Torgeir.
(2022)
Strain distribution at the transition from bent to unbent regions in tube rotary draw bending: an in-situ, real-time measurement study.
IOP Conference Series: Materials Science and Engineering
Vitenskapelig artikkel
-
Tronvoll, Sigmund Arntsønn;
Blindheim, Jørgen;
Ma, Jun;
Welo, Torgeir.
(2022)
A new, flexible tool concept for rotary die stretch bending.
Manufacturing Letters
Vitenskapelig artikkel
-
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir;
Ringen, Geir.
(2022)
On Dimensional Control in Rotary Stretch Bending of Aluminum Profiles: Loading-Path Effects.
Manufacturing Letters
Vitenskapelig artikkel
-
Zhou, Xianyan;
Ma, Jun;
Welo, Torgeir.
(2022)
Numerical Analyses of Deformation Mechanisms in a Novel Dimensional Calibration Technique for Thin-Walled, Open Extrusions.
Key Engineering Materials
Vitenskapelig artikkel
-
Yang, YF;
He, ZR;
Ma, Jun;
Yang, H;
Min, JY;
Zang, SL.
(2022)
Evolving asymmetric and anisotropic hardening of CP-Ti sheets under monotonic and reverse loading: Characterization and modeling.
International journal of plasticity
Vitenskapelig artikkel
-
He, Xu;
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir.
(2022)
In-Process Monitoring of Springback in Industrial Bending Using a Laser Sensor-Based Method.
Key Engineering Materials
Vitenskapelig artikkel
2021
-
Ma, Jun;
Li, H;
Chen, GY;
Welo, Torgeir;
Li, GJ.
(2021)
Machine Learning (ML)-Based Prediction and Compensation of Springback for Tube Bending.
Springer
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
-
Wan, Di;
Guan, Shuai;
Wang, Dong;
Lu, Xu;
Ma, Jun.
(2021)
Hydrogen embrittlement of additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy.
Corrosion Science
Vitenskapelig artikkel
-
Ma, Jun;
Welo, Torgeir;
Blindheim, Jørgen;
Ha, Taekwang.
(2021)
Effect of Stretching on Springback in Rotary Stretch Bending of Aluminium Alloy Profiles.
Key Engineering Materials
Vitenskapelig artikkel
-
Ma, Jun;
Welo, Torgeir;
Wan, Di.
(2021)
The impact of thermo-mechanical processing routes on product quality in integrated aluminium tube bending process.
Journal of Manufacturing Processes
Vitenskapelig artikkel
-
Ma, Jun;
Welo, Torgeir.
(2021)
Analytical springback assessment in flexible stretch bending of complex shapes.
International journal of machine tools & manufacture
Vitenskapelig artikkel
-
Zhou, Xianyan;
Welo, Torgeir;
Ma, Jun;
Tronvoll, Sigmund A..
(2021)
Deformation characteristics in a stretch-based dimensional correction method for open, thin-walled extrusions.
Metals
Vitenskapelig artikkel
2020
-
Welo, Torgeir;
Ringen, Geir;
Ma, Jun.
(2020)
An overview and evaluation of alternative forming processes for complex aluminium products.
Procedia Manufacturing
Vitenskapelig artikkel
-
Raknes, Christian Arne;
Ma, Jun;
Welo, Torgeir;
Paulsen, Frode.
(2020)
A new mechanical calibration strategy for U-channel extrusions.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig artikkel
-
Welo, Torgeir;
Ma, Jun;
Blindheim, Jørgen;
Ha, Taekwang;
Ringen, Geir.
(2020)
Flexible 3D Stretch Bending of Aluminium Alloy Profiles: An Experimental and Numerical Study.
Procedia Manufacturing
Vitenskapelig artikkel
-
Ma, Jun;
Ha, Taekwang;
Blindheim, Jørgen;
Welo, Torgeir;
Ringen, Geir;
Li, Heng.
(2020)
Exploring the Influence of Pre/Post-Aging on Springback in Al-Mg-Si Alloy Tube Bending.
Procedia Manufacturing
Vitenskapelig artikkel
-
Ha, Taekwang;
Ma, Jun;
Blindheim, Jørgen;
Welo, Torgeir;
Ringen, Geir;
Wang, Jyhwen.
(2020)
In-line Springback Measurement for Tube Bending Using a Laser System.
Procedia Manufacturing
Vitenskapelig artikkel
Tidsskriftspublikasjoner
-
Oliveira, C.M.;
Cazacu, O.;
Revil Baudard, B.;
Neto, D.M.;
Frohn-Sörensen, P.;
Ma, Jun.
(2023)
ESAFORM 2021 cup drawing benchmark of an Al alloy: Critical follow up analysis of its potentials.
Materials Research Proceedings (MRP)
Vitenskapelig artikkel
-
Williams, William Matthew;
Sandnes, Lise;
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir.
(2023)
Yield Stress and Work Hardening Behavior of Extruded AA6082 Profiles under Different Homogenization and Extrusion Conditions.
Materials Research Proceedings (MRP)
Vitenskapelig artikkel
-
Tronvoll, Sigmund Arntsønn;
Treffen, Helena;
Ma, Jun;
Welo, Torgeir.
(2023)
Low-cost tooling concept for customized tube bending by the use of additive manufacturing.
Materials Research Proceedings (MRP)
Vitenskapelig artikkel
-
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir.
(2023)
Prediction and analysis of real-time forces in novel 3D flexible rotary stretch forming of complex profiles.
CIRP - Journal of Manufacturing Science and Technology
Vitenskapelig artikkel
-
Liu, Wencheng;
Huang, Jia;
Pang, Yong;
Zhu, Ke;
Li, Shugen;
Ma, Jun.
(2023)
Multi-scale modelling of evolving plastic anisotropy during Al-alloy sheet forming.
International Journal of Mechanical Sciences
Vitenskapelig artikkel
-
Zhou, Xianyan;
Ma, Jun;
Zhou, Wenbin;
Welo, Torgeir.
(2023)
Forming-based geometric correction methods for thin-walled metallic components: a selective review.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig oversiktsartikkel/review
-
Pang, Yong;
Grilli, Nicolò;
Su, Hang;
Liu, Wencheng;
Ma, Jun;
Yu, Siu Fung.
(2022)
Experimental investigation on microstructures and mechanical properties of PG4 flash-butt rail welds.
Engineering Failure Analysis
Vitenskapelig artikkel
-
Habraken, A.M.;
Aksen, T.A.;
Alves, J.L.;
Amaral, R.L.;
Betaieb, E.;
Chandola, N..
(2022)
Analysis of ESAFORM 2021 cup drawing benchmark of an Al alloy, critical factors for accuracy and efficiency of FE simulations.
International Journal of Material Forming
Vitenskapelig oversiktsartikkel/review
-
Wang, Xintong;
Ma, Jun;
Welo, Torgeir.
(2022)
Influence of deformation prior to ageing on fatigue behavior of extruded AA6082-T6 profiles.
International Journal of Fatigue
Vitenskapelig artikkel
-
Lu, Xu;
Díaz, Andrés;
Ma, Jun;
Wang, Dong;
He, Jianying;
Zhang, Zhiliang.
(2022)
The effect of plastic deformation on hydrogen diffusion in nickel Alloy 625.
Scripta Materialia
Vitenskapelig artikkel
-
Tronvoll, Sigmund Arntsønn;
Ma, Jun;
Welo, Torgeir.
(2022)
Deformation behavior in tube bending: a comparative study of compression bending and rotary draw bending.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig artikkel
-
He, Xu;
Ma, Jun;
Welo, Torgeir.
(2022)
Strain distribution at the transition from bent to unbent regions in tube rotary draw bending: an in-situ, real-time measurement study.
IOP Conference Series: Materials Science and Engineering
Vitenskapelig artikkel
-
Tronvoll, Sigmund Arntsønn;
Blindheim, Jørgen;
Ma, Jun;
Welo, Torgeir.
(2022)
A new, flexible tool concept for rotary die stretch bending.
Manufacturing Letters
Vitenskapelig artikkel
-
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir;
Ringen, Geir.
(2022)
On Dimensional Control in Rotary Stretch Bending of Aluminum Profiles: Loading-Path Effects.
Manufacturing Letters
Vitenskapelig artikkel
-
Zhou, Xianyan;
Ma, Jun;
Welo, Torgeir.
(2022)
Numerical Analyses of Deformation Mechanisms in a Novel Dimensional Calibration Technique for Thin-Walled, Open Extrusions.
Key Engineering Materials
Vitenskapelig artikkel
-
Yang, YF;
He, ZR;
Ma, Jun;
Yang, H;
Min, JY;
Zang, SL.
(2022)
Evolving asymmetric and anisotropic hardening of CP-Ti sheets under monotonic and reverse loading: Characterization and modeling.
International journal of plasticity
Vitenskapelig artikkel
-
He, Xu;
Ma, Jun;
Tronvoll, Sigmund Arntsønn;
Welo, Torgeir.
(2022)
In-Process Monitoring of Springback in Industrial Bending Using a Laser Sensor-Based Method.
Key Engineering Materials
Vitenskapelig artikkel
-
Wan, Di;
Guan, Shuai;
Wang, Dong;
Lu, Xu;
Ma, Jun.
(2021)
Hydrogen embrittlement of additively manufactured AlCoCrFeNi2.1 eutectic high-entropy alloy.
Corrosion Science
Vitenskapelig artikkel
-
Ma, Jun;
Welo, Torgeir;
Blindheim, Jørgen;
Ha, Taekwang.
(2021)
Effect of Stretching on Springback in Rotary Stretch Bending of Aluminium Alloy Profiles.
Key Engineering Materials
Vitenskapelig artikkel
-
Ma, Jun;
Welo, Torgeir;
Wan, Di.
(2021)
The impact of thermo-mechanical processing routes on product quality in integrated aluminium tube bending process.
Journal of Manufacturing Processes
Vitenskapelig artikkel
-
Ma, Jun;
Welo, Torgeir.
(2021)
Analytical springback assessment in flexible stretch bending of complex shapes.
International journal of machine tools & manufacture
Vitenskapelig artikkel
-
Zhou, Xianyan;
Welo, Torgeir;
Ma, Jun;
Tronvoll, Sigmund A..
(2021)
Deformation characteristics in a stretch-based dimensional correction method for open, thin-walled extrusions.
Metals
Vitenskapelig artikkel
-
Welo, Torgeir;
Ringen, Geir;
Ma, Jun.
(2020)
An overview and evaluation of alternative forming processes for complex aluminium products.
Procedia Manufacturing
Vitenskapelig artikkel
-
Raknes, Christian Arne;
Ma, Jun;
Welo, Torgeir;
Paulsen, Frode.
(2020)
A new mechanical calibration strategy for U-channel extrusions.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig artikkel
-
Welo, Torgeir;
Ma, Jun;
Blindheim, Jørgen;
Ha, Taekwang;
Ringen, Geir.
(2020)
Flexible 3D Stretch Bending of Aluminium Alloy Profiles: An Experimental and Numerical Study.
Procedia Manufacturing
Vitenskapelig artikkel
-
Ma, Jun;
Ha, Taekwang;
Blindheim, Jørgen;
Welo, Torgeir;
Ringen, Geir;
Li, Heng.
(2020)
Exploring the Influence of Pre/Post-Aging on Springback in Al-Mg-Si Alloy Tube Bending.
Procedia Manufacturing
Vitenskapelig artikkel
-
Ha, Taekwang;
Ma, Jun;
Blindheim, Jørgen;
Welo, Torgeir;
Ringen, Geir;
Wang, Jyhwen.
(2020)
In-line Springback Measurement for Tube Bending Using a Laser System.
Procedia Manufacturing
Vitenskapelig artikkel
Del av bok/rapport
-
Ma, Jun;
Li, H;
Chen, GY;
Welo, Torgeir;
Li, GJ.
(2021)
Machine Learning (ML)-Based Prediction and Compensation of Springback for Tube Bending.
Springer
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Undervisning
Emner
- MAST2009 - 3D datamodellering og simulering
- TMM4960 - Produktutvikling og materialer, masteroppgave
- MM8200 - Aluminium teknologi: Ekstrudering og forming
- TMM4540 - Industriell IKT produktutvikling og materialer, fordypningsprosjekt
- TMM4560 - Produktutvikling og materialer, fordypningsprosjekt
- TMM4935 - Industriell IKT, masteroppgave
- TMM4182 - Metallforming og tilhørende bærekraftige produksjonsprosesser
Formidling
2023
-
Vitenskapelig foredragTronvoll, Sigmund Arntsønn; Treffen, Helena; Ma, Jun; Welo, Torgeir. (2023) Low-cost tooling concept for customized tube bending by the use of additive manufacturing. ESAFORM and AGH University of Science and Technology The 26th International Esaform Conference (ESAFORM2023) , Kraków 2023-04-18 - 2023-04-21
-
Vitenskapelig foredragWilliams, William Matthew; Sandnes, Lise; Ma, Jun; Tronvoll, Sigmund Arntsønn; Welo, Torgeir. (2023) Yield Stress and Work Hardening Behavior of Extruded AA6082 Profiles under Different Homogenization and Extrusion Conditions. European Scientific Association for Material Forming ESAFORM 2023 , Kraków 2023-04-19 - 2023-04-21
2022
-
Vitenskapelig foredragHe, Xu; Ma, Jun; Tronvoll, Sigmund Arntsønn; Welo, Torgeir. (2022) In-Process Monitoring of Springback in Industrial Bending Using a Laser Sensor-Based Method. 25th International Conference on Material Forming , Braga 2022-04-27 - 2022-04-29
-
Vitenskapelig foredragZhou, Xianyan; Ma, Jun; Welo, Torgeir. (2022) Numerical Analyses of Deformation Mechanisms in a Novel Dimensional Calibration Technique for Thin-Walled, Open Extrusions. ESAFORM 25th International Conference on Material Forming 2022-04-26 - 2022-04-29
-
Vitenskapelig foredragHe, Xu; Ma, Jun; Welo, Torgeir. (2022) Strain distribution at the transition from bent to unbent regions in tube rotary draw bending: an in-situ, real-time measurement study. The 19th International Conference on Metal Forming 2022-09-11 - 2022-09-14
2021
-
Vitenskapelig foredragMa, Jun; Tronvoll, Sigmund Arntsønn; Welo, Torgeir; Ringen, Geir. (2021) On Dimensional Control in Rotary Stretch Bending of Aluminum Profiles: Loading-Path Effects. Purdue University 50th SME North American Manufacturing Research Conference (NAMRC 50, 2022) , West Lafayette 2021-06-27 - 2021-07-01
-
Vitenskapelig foredragHa, Taekwang; Ma, Jun; Blindheim, Jørgen; Welo, Torgeir; Ringen, Geir; Wang, Jyhwen. (2021) A computer vision-based, in-situ springback monitoring technique for bending of large profiles. Liege Univeristy 24th International Conference on Material Forming , Liege 2021-04-14 - 2021-04-16
-
Vitenskapelig foredragMa, Jun; Welo, Torgeir; Ringen, Geir. (2021) Efficient Prediction of Real-Time Forming Forces in Flexible Stretch Bending. Liege Univeristy 24th International Conference on Material Forming , Liege 2021-04-14 - 2021-04-16
-
Vitenskapelig foredragMa, Jun; Li, H; Chen, GY; Welo, Torgeir; Li, GJ. (2021) Machine learning (ML)-based prediction and compensation of springback for tube bending. The Ohio State University The 13th International Conference on the Technology of Plasticity (ICTP 2021) , Ohio 2021-07-25 - 2021-07-30
2020
-
Vitenskapelig foredragWelo, Torgeir; Ma, Jun; Blindheim, Jørgen; Ha, Taekwang; Ringen, Geir. (2020) Flexible 3D Stretch Bending of Aluminium Alloy Profiles: An Experimental and Numerical Study. AGH University of Science and Technology 18th International Conference on Metal Forming 2020-09-13 - 2020-09-16
-
Vitenskapelig foredragMa, Jun; Ha, Taekwang; Welo, Torgeir; Blindheim, Jørgen; Ringen, Geir. (2020) Exploring the Influence of Pre/Post-Aging on Springback in Al-Mg-Si Alloy Tube Bending. European Scientific Association for Materials Forming 23rd International Conference on Material Forming 2020-05-04 - 2020-05-08
-
Vitenskapelig foredragHa, Taekwang; Ma, Jun; Blindheim, Jørgen; Welo, Torgeir; Ringen, Geir; Wang, Jyhwen. (2020) In-line Springback Measurement for Tube Bending Using a Laser System. European Scientific Association for Materials Forming 23rd International Conference on Material Forming 2020-05-04 - 2020-05-08
2019
-
Vitenskapelig foredragHe, ZR; Li, H; Ma, Jun; Yang, H; Min, JY. (2019) Characterization and modeling of evolving asymmetric/anisotropic hardening of CP-Ti sheet under monotonic and reverse loading. Frontiers in Materials Processing Applications, Research and Technology 2019 (FiMPART'2019) , Ahmedabad 2019-12-15 - 2019-12-18
-
Vitenskapelig foredragLi, H; Ma, Jun; He, ZR; Chen, GY. (2019) Whole-Period Springback Issue in Metal Forming: Phenomena, Mechanisms, Modeling and Control. International Conference on Lightweight Materials and Manufacture 2018 (ICLMM'2018) , Changsha 2019-10-09 - 2019-10-12