2025

• Furu, Trond; Ellingsen, Kjerstin; Ringen, Geir. (2025) Green aluminium products. International Aluminium Journal
  Fagartikkel

2024

• Wang, Yaping; Fagermo, Moa; Furu, Trond; Justnes, Harald; Marthinsen, Knut. (2024) Compatibility of Different Aluminium with a New Environmental-Friendly Concrete. Advances in Science and Technology
  Vitenskapelig artikkel
• Myhr, Ole Runar; Nesse, Anders; Iddberg, Mads Bakken; Furu, Trond. (2024) Modeling the Effect of Composition and Billet Temperature on Extrudability and Properties of AlMgSi Alloys. Thirteenth International Aluminium Extrusion Technology Seminar & Exposition
  Vitenskapelig artikkel
• Iddberg, Mads Bakken; Myhr, Ole Runar; Nesse, Anders; Furu, Trond. (2024) A Modelling Framework for Rapid Evaluation of Speed Limitations During Extrusion of Aluminium Profiles. Key Engineering Materials
  Vitenskapelig artikkel
• Iddberg, Mads Bakken; Myhr, Ole Runar; Nesse, Anders; Furu, Trond. (2024) A Virtual Extrusion Test for Rapid Evaluation of Extrudability of 6xxx-Series Aluminum Profiles. Thirteenth International Aluminium Extrusion Technology Seminar & Exposition
  Vitenskapelig artikkel
• Nesse, Anders; Iddberg, Mads Bakken; Myhr, Ole Runar; Furu, Trond. (2024) Optimization of Geometric Design of Extruded Products Incorporating Properties, Cost and CO2 Footprint. Materials Science Forum
  Vitenskapelig artikkel

2023

• Saai, Afaf; Delhaye, Virgile Roger; Lange, Torstein; Furu, Trond; Aamot, Kristian; Lein, John Erik. (2023) Comparative study of the effects of galvanic corrosion on the strength and the failure of aluminium and stainless steel bolted joints. Journal of Advanced Joining Processes
  Vitenskapelig artikkel
• Justnes, Harald; Danner, Tobias; Kleinau, K.F.; Westermann, Ida; Furu, Trond. (2023) Using Calcined Clay and Calcium Chloride to Enable Aluminium Reinforced Concrete.
  Vitenskapelig kapittel
• Nesse, Anders; Iddberg, Mads Bakken; Myhr, Ole Runar; Furu, Trond. (2023) Optimization of Geometric Design of Extruded Products Incorporating Properties, Cost and CO2 Footprint.
  Vitenskapelig kapittel
• Iddberg, Mads Bakken; Myhr, Ole Runar; Nesse, Anders; Furu, Trond. (2023) A Modelling Framework for Rapid Evaluation of Speed Limitations During Extrusion of Aluminium Profiles.
  Vitenskapelig kapittel

2022

• Østhus, Rune; Myhr, Ole Runar; Furu, Trond; Nesse, Anders; Iddberg, Mads Bakken; Hamarsnes, Anne. (2022) The Use of Artificial Intelligence (AI) for Improving Structural Properties of Welded Aluminum Extrusions. Aluminum Extrudes Council - ET Proceedings
  Vitenskapelig artikkel
• Berger, Sven; Ravikumar, Aravinth; Gouttebroze, Sylvain; Justnes, Harald; Friis, Jesper; Myhr, Ole Runar; Furu, Trond; Zheludkevich, Mikhail; Höche, Daniel. (2022) Simulation workflow for the optimization of protective interface layer formation in novel aluminium reinforced concrete.
  Vitenskapelig kapittel

2021

• Vallejo-Olivares, Alicia; Philipson, Harald; Gökelma, Mertol; Roven, Hans Jørgen; Furu, Trond; Kvithyld, Anne; Tranell, Gabriella. (2021) Compaction of aluminium foil and its effect on oxidation and recycling yield. The Minerals, Metals & Materials Series
  Vitenskapelig artikkel
• Runningen, Ingvild; Westermann, Ida; Furu, Trond; Justnes, Harald. (2021) In Situ Measurements of the Chemical Stability of a Cast Aluminum Alloy Embedded in a Cement Paste with a High Amount of Supplementary Cementitious Material. Metals
  Vitenskapelig artikkel
• Langelandsvik, Geir; Akselsen, Odd Magne; Furu, Trond; Roven, Hans Jørgen. (2021) Review of aluminum alloy development for wire arc additive manufacturing. Materials
  Vitenskapelig oversiktsartikkel

2020

• Langelandsvik, Geir; Furu, Trond; Reiso, Oddvin; Roven, Hans Jørgen. (2020) Effects of iron precipitation and novel metal screw extrusion on electrical conductivity and properties of AA1370 aluminium. Materials Science & Engineering: B. Solid-state Materials for Advanced Technology
  Vitenskapelig artikkel
• Langelandsvik, Geir; Grandcolas, Mathieu; Skorpen, Kristian Grøtta; Furu, Trond; Akselsen, Odd Magne; Roven, Hans Jørgen. (2020) Development of AL-TIC wire feedstock for additive manufacturing by metal screw extrusion. Metals
  Vitenskapelig artikkel
• Langelandsvik, Geir; Horgar, Annbjørg; Furu, Trond; Roven, Hans Jørgen; Akselsen, Odd Magne. (2020) Comparative study of eutectic Al-Si alloys manufactured by WAAM and casting. The International Journal of Advanced Manufacturing Technology
  Vitenskapelig artikkel
• Lervik, Adrian; Danbolt, Turid; Furu, Trond; Holmestad, Randi; Lunder, Otto. (2020) Comparing intergranular corrosion in Al‐Mg‐Si‐Cu alloys with and without α‐Al(Fe,Mn,Cu)Si particles. Materials and corrosion - Werkstoffe und Korrosion
  Vitenskapelig artikkel

2018

• Marioara, Calin Daniel; Lervik, Adrian; Grønvold, Julie; Lunder, Otto; Wenner, Sigurd; Furu, Trond; Holmestad, Randi. (2018) The correlation between intergranular corrosion resistance and copper content in the precipitate microstructure in an AA6005A alloy. Metallurgical and Materials Transactions A
  Vitenskapelig artikkel

2017

• Furu, Trond; Søreide, Jostein; Myhr, Ole Runar; Østhus, Rune. (2017) A novel methodology for optimization of properties, costs and sustainability of aluminium extrusions. Materials Science Forum
  Vitenskapelig artikkel
• Nyhus, Bård; Dumoulin, Stephane; Nordhagen, Håkon Ottar; Midling, Ole Terje; Myhr, Ole Runar; Furu, Trond; Lundberg, Steinar Henning. (2017) Cross-weld tensile strength of aluminum alloys en AW 5083 and 6082. ISOPE - International Offshore and Polar Engineering Conference. Proceedings
  Vitenskapelig artikkel

2015

• Ryen, Øyvind; Holmedal, Bjørn; Marthinsen, Knut; Furu, Trond. (2015) Precipitation, strength and work hardening of age hardened aluminium alloys. IOP Conference Series: Materials Science and Engineering
  Vitenskapelig artikkel
• Pedersen, Ketill Olav; Westermann, Ida; Furu, Trond; Børvik, Tore; Hopperstad, Odd Sture. (2015) Influence of microstructure on work-hardening and ductile fracture of aluminium alloys. Materials & Design
  Vitenskapelig artikkel

2014

• Hopperstad, Odd Sture; Westermann, Ida; Pedersen, Ketill Olav; Furu, Trond; Børvik, Tore. (2014) Influence of processing route on the work-hardening and ductile fracture of an AA6060 aluminium alloy. Materials Science Forum
  Vitenskapelig artikkel
• Westermann, Ida; Pedersen, Ketill Olav; Furu, Trond; Børvik, Tore; Hopperstad, Odd Sture. (2014) Effects of particles and solutes on strength, work-hardening and ductile fracture of aluminium alloys. Mechanics of materials (Print)
  Vitenskapelig artikkel
• Myhr, Ole Runar; Østhus, Rune; Furu, Trond. (2014) A novel methodology for optimisation of product properties and production costs in fabrication of aluminium alloys. Materials Science Forum
  Vitenskapelig artikkel
• Xu, Zebing; Roven, Hans Jørgen; Furu, Trond; Jia, Zhihong. (2014) Cryogenic temperature and strain rate dependence of mechanical properties for extruded AA6060 alloys. Materials Science Forum
  Vitenskapelig artikkel

2013

• Håkonsen, Arild; Mortensen, Dag; Benum, Steinar Johansen; Pettersen, Tanja; Furu, Trond. (2013) Modelling the metallurgical reactions during homogenisation of an AA31O3 alloy.
  Vitenskapelig kapittel

2012

• Li, Yanjun; Muggerud, Astrid Marie F; Furu, Trond; Olsen, Arne. (2012) Precipitation of partially coherent alpha-Al(Mn,Fe)Si dispersoids and their strengthening effect in AA 3003 alloy. Acta Materialia
  Vitenskapelig artikkel
• Fjeldbo, Snorre Kjørstad; Li, Yanjun; Marthinsen, Knut; Furu, Trond. (2012) Through-process sensitivity analysis on the effect of process variables on strength in extruded Al-Mg-Si alloys. Journal of Materials Processing Technology
  Vitenskapelig artikkel

2008

• Pedersen, Ketill Olav; Lademo, Odd-Geir; Berstad, Torodd; Furu, Trond; Hopperstad, Odd Sture. (2008) Influence of texture and grain structure on strain localisation and formability for AlMgSi alloys. Journal of Materials Processing Technology
  Vitenskapelig artikkel
• Lademo, Odd-Geir; Berstad, Torodd; Eriksson, Magnus; Tryland, Tore Helge; Furu, Trond; Hopperstad, Odd Sture; Langseth, Magnus. (2008) A model for process-based crash simulation. International Journal of Impact Engineering
  Vitenskapelig artikkel
• Lademo, Odd-Geir; Pedersen, Ketill Olav; Berstad, Torodd; Furu, Trond; Hopperstad, Odd Sture. (2008) An experimental and numerical study on the formability of textured AlZnMg alloys. European Journal of Mechanics. A, Solids
  Vitenskapelig artikkel
• Forbord, Børge; Mathiesen, Ragnvald; Mårdalen, Jostein; Furu, Trond; Lange, Hans Iver. (2008) Elastic strain and texture evolution during tensile testing of peak-hardened Al-Mg-Si-profiles. Materials Science & Engineering: A
  Vitenskapelig artikkel