2026

• Endrös, Paula; Razavi, Nima; Deconinck, Liesbet; Johnsen, Roy; Lu, Xu. (2026) The role of surface roughness on hydrogen embrittlement of electron beam powder bed fusion Ti−6Al−4V. Materials Science & Engineering: A
  Vitenskapelig artikkel
• Deconinck, Liesbet; Paczkowska, Zuzanna; Hagen, Anette Brocks; Johnsen, Roy; Lu, Xu. (2026) Hydrogen-assisted degradation of base metal and heat affected zone in X65 pipeline steel welds with varying surface finishes evaluated by in-situ microcantilever bending. Corrosion Science
  Vitenskapelig artikkel

2025

• Endrös, Paula; Deconinck, Liesbet; Razavi, Nima; Kapci, Mehmet Fazil; Johnsen, Roy; Lu, Xu. (2025) Hydrogen embrittlement in Ti–6Al–4V: A comparative review of conventional and additive manufacturing. International Journal of Hydrogen Energy
  Vitenskapelig oversiktsartikkel/review
• Kapci, Mehmet Fazil; Deconinck, Liesbet; Alvaro, Antonio; Johnsen, Roy; Zhang, Zhiliang; Lu, Xu. (2025) Probing the effect of solute hydrogen and hydrides on the prismatic slip of [2-1-10] -orientated alpha titanium using in-situ micropillar compression. Scripta Materialia
  Vitenskapelig artikkel
• Deconinck, Liesbet; Ferreiros, Pedro A.; Que, Zaiqing; Johnsen, Roy; Lu, Xu. (2025) Hydrogen interaction with post-processed L-PBF 316L stainless steel. Procedia Structural Integrity
  Vitenskapelig artikkel
• Deconinck, Liesbet; Ferreiros, Pedro A.; Yu, Haiyang; Soundararajan, Chandrahaasan; Johnsen, Roy; Que, Zaiqing. (2025) On the improved hydrogen embrittlement resistance in stress relieved laser powder bed fused 316L stainless steel over the hot isostatic pressed equivalent. Corrosion Science
  Vitenskapelig artikkel

2024

• Deconinck, Liesbet; Lu, Xu; Wang, Dong; Johnsen, Roy; Verbeken, Kim; Depover, Tom. (2024) Hydrogen enhanced localised plasticity of single grain α titanium verified by in-situ hydrogen microcantilever bending. International Journal of Hydrogen Energy
  Vitenskapelig artikkel
• Deconinck, Liesbet; Depover, Tom; Verbeken, Kim. (2024) Characterisation of hydride formation in as-built and heat treated laser powder bed fused Ti-6Al-4V. Journal of Alloys and Compounds
  Vitenskapelig artikkel
• Deconinck, Liesbet; Lu, Xu; Wang, Dong; Johnsen, Roy; Verbeken, Kim; Depover, Tom. (2024) Multiscale evaluation of hydrogen-assisted mechanical degradation in grade 2 titanium. Journal of Alloys and Compounds
  Vitenskapelig artikkel

2023

• Deconinck, Liesbet; Quejido, Elena Bernardo; Vidaller, Maria T. Villa; Jägle, Eric A.; Verbeken, Kim; Depover, Tom. (2023) The mechanism behind the effect of building orientation and surface roughness on hydrogen embrittlement of laser powder bed fused Ti-6Al-4V. Additive Manufacturing
  Vitenskapelig artikkel
• Deconinck, Liesbet. (2023) Micromechanistic structure-performance assessment of hydrogen interaction with (additive manufactured) titanium. Universiteit Gent Universiteit Gent
  Doktorgradsavhandling
• Claeys, Lisa; Deconinck, Liesbet; Verbeken, Kim; Depover, Tom. (2023) Effect of additive manufacturing and subsequent heat and/or surface treatment on the hydrogen embrittlement sensitivity of 316L austenitic stainless steel. International Journal of Hydrogen Energy
  Vitenskapelig artikkel
• Deconinck, Liesbet; Depover, Tom; Verbeken, Kim. (2023) The mechanism of hydride formation during electrochemical hydrogen charging of Ti-6Al-4V. Materials Today Sustainability
  Vitenskapelig artikkel
• Deconinck, Liesbet; Vidaller, Maria T. Villa; Quejido, Elena Bernardo; Jägle, Eric A.; Depover, Tom; Verbeken, Kim. (2023) In-situ hydrogen embrittlement evaluation of as-built and heat treated laser powder bed fused Ti-6Al-4V versus conventionally cold rolled Ti-6Al-4V. Additive Manufacturing
  Vitenskapelig artikkel

2021

• Pien, Nele; Deconinck, Liesbet; Peeters, Ian; Damme, Lana Van; Wilde, Lieven De; Martens, Ann. (2021) Design and development of a reinforced tubular electrospun construct for the repair of ruptures of deep flexor tendons. Materials Science and Engineering C: Materials for Biological Applications
  Vitenskapelig artikkel