Kjell Arne Malo
Bakgrunn og aktiviteter
Vitenskapelig, faglig og kunstnerisk arbeid
Viser et utvalg av aktivitet. Se alle publikasjoner i databasen
Tidsskriftspublikasjoner
- (2018) Withdrawal of pairs of threaded rods with small edge distances and spacings. European Journal of Wood and Wood Products. vol. 76 (1).
- (2016) Some structural design issues of the 14-storey timber framed building “Treet” in Norway. European Journal of Wood and Wood Products. vol. 74 (3).
- (2016) Withdrawal stiffness of threaded rods embedded in timber elements. Construction and Building Materials. vol. 116.
- (2015) Prediction of material damping in timber floors, and subsequent evaluation of structural damping. Materials and Structures. vol. 48 (6).
- (2015) Characteristic withdrawal capacity and stiffness of threaded rods. INTER - International Network on Timber Engineering Research.
- (2015) Withdrawal capacity of threaded rods embedded in timber elements. Construction and Building Materials. vol. 94.
- (2013) Moisture-induced stresses in glulam cross sections during wetting exposures. Wood Science and Technology. vol. 47 (2).
- (2013) Experimental evaluations of material damping in timber beams of structural dimensions. Wood Science and Technology. vol. 47 (5).
- (2013) Modified hysteretic damping model applied to Timoshenko timber beams. Computers & structures. vol. 121.
- (2013) Semi-analytical prediction and experimental evaluation of material damping in wood panels. Holzforschung. vol. 67 (3).
- (2012) Effect of self-tapping screws on moisture induced stresses in glulam. Engineering structures. vol. 45.
- (2012) The effect of climate variations on glulam - an experimental study. European Journal of Wood and Wood Products. vol. 70 (5).
- (2011) Quantifying ductility in timber structures. Engineering structures. vol. 33 (11).
- (2010) Moisture induced stresses perpendicular to the grain in glulam: Review and evaluation of the relative importance of models and parameters. Holzforschung. vol. 64 (5).
- (2009) Planar Strain Measurements on Wood Specimens. Experimental mechanics. vol. 49 (4).
- (2009) Linear shear properties of spruce softwood. Wood Science and Technology. vol. 43 (5-6).
- (2009) Nonlinear shear properties of spruce softwood: Numerical analyses of experimental results. Composites Science And Technology. vol. 69 (13).
- (2009) Nonlinear shear properties of spruce softwood: experimental results. Wood Science and Technology. vol. 43 (7-8).
- (2003) Effect of Target Thickness in Blunt Projectile Peneration of Weldox 460 E Steel Plates. International Journal of Impact Engineering. vol. 28.
- (2002) Preforation of 12 mm Thick Steel Plates by 20 mm diameter Projectiles with Blunt, Hemispherical and Conical Noses, Part I: Experimental Study. International Journal of Impact Engineering. vol. 27 (1).
- (2002) Modelling of plastic anisotropy in heat-treated aluminium extrusions. Journal of Materials Processing Technology. vol. 126-126.
- (2001) Water pressure chamber for static testing of panels. International Journal of Mechanical Sciences. vol. 43 (5).
- (1999) Ballistic Penetration of Steel Plates. International Journal of Impact Engineering. vol. 22.
- (1998) Calibration of Anisotropic Yield Criteria Using Uniaxial Tension Tests and Bending Tests. Journal of Materials Processing Technology. vol. 80-81.
- (1997) Statistical estimation of loads from gas explosions. Journal of Loss Prevention in the Process Industries. vol. 10 (4).