Jens Christofer Werenskiold
99297837
Kjemi 1, 325, Gløshaugen
Publikasjoner
2024
-
Langelandsvik, Geir;
Skorpen, Kristian Grøtta;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2024)
Review of Metal Screw Extrusion: State of the Art and Beyond.
Metals
Vitenskapelig oversiktsartikkel/review
2023
-
Kirkbakk, Kjell Martin;
Marhaug, Nikolai;
Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Grain refinement of aluminium welds by Ti, TiB2, and TiC filler wire inoculation.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig artikkel
-
Simen, Skurdal;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Characterization of Aluminium TiC nano-composite filler wire inoculated weld metal.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Mastergradsoppgave
-
Samuelsen, Steffen;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Effect of TiC nanoparticle addition in metal screw extruded AA7108 filler wire.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Mastergradsoppgave
2022
-
Kirkbakk, Kjell Martin;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2022)
Aluminum weld metal inoculation by Ti/TiB2/TiC additions to screw extruded filler wires.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Mastergradsoppgave
2008
-
Liu, Manping;
Roven, Hans Jørgen;
Yu, Yingda;
Werenskiold, Jens Christofer.
(2008)
Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Roven, Hans Jørgen;
Liu, Manping;
Werenskiold, Jens Christofer.
(2008)
Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy.
Materials Science & Engineering: A
Vitenskapelig artikkel
2006
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
Understanding the Textural and Microstructural Development in Two-Pass ECAP by Route A of a Commercial Aluminium Alloy.
NATO Science Series : Sub-Series II, Mathematics, Physics and Chemistry
Vitenskapelig artikkel
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
On the Grain Refinement Mechanisms in SPD - Applying High Resolution Electron Microscopy and the LEDS Approach.
Materials Science Forum
Vitenskapelig artikkel
2005
-
Dumoulin, Stephane;
Roven, Hans Jørgen;
Werenskiold, Jens Christofer;
Valberg, Henry Sigvart.
(2005)
Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2005)
Microstructure and texture evolution during ECAP of an AlMgSi alloy: Observations, mechanisms and modeling.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Roven, Hans Jørgen;
Nesbø, Håkon;
Werenskiold, Jens Christofer;
Seibert, Tanja.
(2005)
Mechanical properties of aluminium alloys processed by SPD: Comparison of different alloy systems and possible product areas.
Materials Science & Engineering: A
Vitenskapelig artikkel
2004
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2004)
Equal channel angular pressing (ECAP) of AA6082 : mechanical properties, texture and microstructural development.
Norges teknisk-naturvitenskapelige universitet
Doktoravhandlinger ved NTNU, 1503-8181 (2004:129)
Doktorgradsavhandling
Tidsskriftspublikasjoner
-
Langelandsvik, Geir;
Skorpen, Kristian Grøtta;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2024)
Review of Metal Screw Extrusion: State of the Art and Beyond.
Metals
Vitenskapelig oversiktsartikkel/review
-
Kirkbakk, Kjell Martin;
Marhaug, Nikolai;
Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Grain refinement of aluminium welds by Ti, TiB2, and TiC filler wire inoculation.
The International Journal of Advanced Manufacturing Technology
Vitenskapelig artikkel
-
Liu, Manping;
Roven, Hans Jørgen;
Yu, Yingda;
Werenskiold, Jens Christofer.
(2008)
Deformation structures in 6082 aluminium alloy after severe plastic deformation by equal-channel angular pressing.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Roven, Hans Jørgen;
Liu, Manping;
Werenskiold, Jens Christofer.
(2008)
Dynamic precipitation during severe plastic deformation of an Al–Mg–Si aluminium alloy.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
Understanding the Textural and Microstructural Development in Two-Pass ECAP by Route A of a Commercial Aluminium Alloy.
NATO Science Series : Sub-Series II, Mathematics, Physics and Chemistry
Vitenskapelig artikkel
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2006)
On the Grain Refinement Mechanisms in SPD - Applying High Resolution Electron Microscopy and the LEDS Approach.
Materials Science Forum
Vitenskapelig artikkel
-
Dumoulin, Stephane;
Roven, Hans Jørgen;
Werenskiold, Jens Christofer;
Valberg, Henry Sigvart.
(2005)
Finite element modeling of equal channel angular pressing: Effect of material properties, friction and die geometry.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2005)
Microstructure and texture evolution during ECAP of an AlMgSi alloy: Observations, mechanisms and modeling.
Materials Science & Engineering: A
Vitenskapelig artikkel
-
Roven, Hans Jørgen;
Nesbø, Håkon;
Werenskiold, Jens Christofer;
Seibert, Tanja.
(2005)
Mechanical properties of aluminium alloys processed by SPD: Comparison of different alloy systems and possible product areas.
Materials Science & Engineering: A
Vitenskapelig artikkel
Rapport
-
Simen, Skurdal;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Characterization of Aluminium TiC nano-composite filler wire inoculated weld metal.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Mastergradsoppgave
-
Samuelsen, Steffen;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer.
(2023)
Effect of TiC nanoparticle addition in metal screw extruded AA7108 filler wire.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Mastergradsoppgave
-
Kirkbakk, Kjell Martin;
Kvam-Langelandsvik, Geir;
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2022)
Aluminum weld metal inoculation by Ti/TiB2/TiC additions to screw extruded filler wires.
Norges teknisk-naturvitenskapelige universitet
Norges teknisk-naturvitenskapelige universitet
Mastergradsoppgave
-
Werenskiold, Jens Christofer;
Roven, Hans Jørgen.
(2004)
Equal channel angular pressing (ECAP) of AA6082 : mechanical properties, texture and microstructural development.
Norges teknisk-naturvitenskapelige universitet
Doktoravhandlinger ved NTNU, 1503-8181 (2004:129)
Doktorgradsavhandling
Undervisning
Emner
Formidling
2023
-
Vitenskapelig foredragWerenskiold, Jens Christofer; Skorpen, Kristian Grøtta; Langelandsvik, Geir. (2023) Metal Screw Extrusion, state of the art and beyond. 5th International Conference on Light Materials - Science and Technology , Trondheim 21.06.2023 - 23.06.2023
2009
-
PosterCui, Jirang; Werenskiold, Jens Christofer; Roven, Hans Jørgen. (2009) New approaches for recycling of aluminum scraps. International Symposium on Liquid Metal Processing and Casting Conference , Santa Fe 20.09.2009 - 23.09.2009
2006
-
Vitenskapelig foredragRoven, Hans Jørgen; Liu, Manping; Werenskiold, Jens Christofer. (2006) Dynamic precipitation during severe plastic deformation of an Al-Mg-Si aluminium alloy. The 14th Int. Conference on Strength of Materials (ICSMA14) , Xian 04.06.2006 - 09.06.2006
-
Vitenskapelig foredragLiu, Manping; Roven, Hans Jørgen; Yu, Yingda; Werenskiold, Jens Christofer. (2006) Deformation structures in 6082 aluminium alloy after severe plastic deformation by ECAP. The 14th Int. Conference on Strength of Materials (ICSMA 14) , Xian 04.06.2006 - 09.06.2006
2005
-
PosterErlien, Tomas Laugsand; Werenskiold, Jens Christofer; Lilleby, Anders; Grong, Øystein; Roven, Hans Jørgen. (2005) Continuous Severe Plastic Deformation of Al-Mg-Si Alloys. NanoSPD3- Nanomaterials by Severe Plastic Deformation , Fukuoka 22.09.2005 - 26.09.2005
-
Vitenskapelig foredragRoven, Hans Jørgen; Nesbø, Håkon; Sandberg, Håkon; Werenskiold, Jens Christofer. (2005) Aluminium Alloys subjected to SPD - An Evaluation of Achieved Mechanical Properties. NanoSPD3- Nanomaterials by Severe Plastic Deformation , Fukuoka 22.09.2005 - 26.09.2005
2004
-
Vitenskapelig foredragDumoulin, Stephane; Roven, Hans Jørgen; Werenskiold, Jens Christofer. (2004) Quasi-3D Strain Analyses in Equal Channel Angular Pressing. The 8th Int. Conf. on Numerical Methods in Industrial Forming NUMIFORM-8 , Columbus, Ohio 14.06.2004 - 17.06.2004
-
Vitenskapelig foredragRoven, Hans Jørgen; Werenskiold, Jens Christofer; Dumoulin, Stephan. (2004) Measuring 3D Strains in Equal Channel Angular Pressing. TMS Annual Meeting , Charlotte, North Carolina 14.03.2004 - 18.04.2004
-
Vitenskapelig foredragNesbø, Håkon; Werenskiold, Jens Christofer; Roven, Hans Jørgen. (2004) Mekaniske Egenskaper i Aluminium etter ECAP. Norsk Metallurgisk Sommermøte 2004 , Britannia Hotell, Trondheim 05.05.2004 - 06.05.2004
-
PosterRoven, Hans Jørgen; Werenskiold, Jens Christofer. (2004) Conventional Light Alloys towards the Bottom - a Physical Metallurgical Approach. NANOMAT Conference , Oslo 03.06.2004 - 04.06.2004
2002
-
Vitenskapelig foredragWerenskiold, Jens Christofer; Roven, Hans Jørgen. (2002) Ny formingsteknologi: Equal Channel Angular Pressing, ECAP. Norsk Metallurgisk Sommermøte , Oslo 23.05.2002 - 24.05.2002
-
Vitenskapelig foredragRoven, Hans Jørgen; Werenskiold, Jens Christofer. (2002) Status on the ECAP activity in FORMLAB - an enabling technology for the next Generation of Light Alloys?. Compform Technical Seminar , Royal Garden Hotel, Trondheim 21.11.2002 - 22.11.2002
-
PosterWerenskiold, Jens Christofer; Roven, Hans Jørgen. (2002) Strain Measurements in the ECAP Process. Nanomaterials by Severe Plastic Deformation - NANOSPD2 , Vienna 09.12.2002 - 13.12.2002