Bakgrunn og aktiviteter

Vitenskapelig, faglig og kunstnerisk arbeid

Viser et utvalg av aktivitet. Se alle publikasjoner i databasen

Tidsskriftspublikasjoner

Del av bok/rapport

Andre

  • Siddiqui, Muhammad Salman; Rasheed, Adil; Kvamsdal, Trond; Tabib, Mandar. (2017) On Interactions between Wind Turbines and the Marine Boundary Layer. OMAE 36th International Conference on Ocean, Offshore & Arctic Engineering . ASME; Trondheim. 2017-06-25 - 2017-06-30.
  • Siddiqui, Muhammad Salman; Rasheed, Adil; Kvamsdal, Trond; Tabib, Mandar. (2017) Quasi-Static & Dynamic Numerical Modeling of Full Scale NREL 5MW Wind Turbine. DeepWind 2017 . SINTEF and NOWITECH; Trondheim. 2017-06-25 - 2017-06-30.
  • Siddiqui, Muhammad Salman; Rasheed, Adil; Tabib, Mandar; Kvamsdal, Trond. (2017) Explaining the Torque vs TSR curve in a Fully Resolved Setting on a Mega Watt Size Wind Turbine. 14th Deep Sea Offshore Wind Conference, Deepwind, 18-21 January 2017, Trondheim, Norway. . SINTEF Energy; Trondheim. 2017-01-18 - 2017-01-21.
  • Siddiqui, Muhammad Salman; Rasheed, Adil; Tabib, Mandar; Kvamsdal, Trond. (2017) Numerical Modeling Framework for Wind Turbine Analysis & Atmospheric Boundary Layer Interaction. Scitech Conference . AIAA; Grapevine Texas. 2017-01-09 - 2017-01-13.
  • Tabib, Mandar; Rasheed, Adil; Fonn, Eivind; Siddiqui, Muhammad Salman; Kvamsdal, Trond. (2017) Near wake region of an industrial scale wind turbine: comparing LES-ALM with LES-SMI simulations using data mining. WAKE 2017 ; 2017-05-30 - 2017-06-01.
  • Tabib, Mandar; Rasheed, Adil; Siddiqui, Muhammad Salman. (2017) A 3D Vs 2.5D Vs 2D CFD analysis of 5MW NREL reference wind-turbine to study impact of bluff section. EERA Deepwind Conference . NOWITECH SINTEF; Trondheim. 2017-01-18 - 2017-01-21.
  • Tabib, Mandar; Rasheed, Adil; Siddiqui, Muhammad Salman. (2017) Simulating Single turbine and associated wake development - comparison of computational methods (Actuator Line Vs Sliding Mesh Interface Vs Multiple Reference Frame) for an industrial scale wind turbine. EERA Deepwind Conference . EERA , NOWITECH SINTEF; Trondheim. 2017-01-08 - 2017-01-21.
  • Siddiqui, Muhammad Salman. (2016) Fluid Surface Interaction (FSI) analysis of Mega Watt Size Offshore Wind Turbine. Math Meets Industry Conference . NTNU; Trondheim. 2016-09-22 - 2016-09-23.
  • Siddiqui, Muhammad Salman; Rasheed, Adil; Kvamsdal, Trond; Tabib, Mandar. (2015) Three Dimensional Variable Turbulent Intensity Flow Field Characterization of a Vertical Axis Wind Turbine. 12 Deep Sea Offshore Wind R&D Conference . SINTEF Energy; Trondheim. 2015-02-04 - 2015-02-06.
  • Furrukh, Ahmed; Rahman, Syed; Siddiqui, Muhammad Salman. (2014) Optimization of an Internal Combustion Engine`s Efficiency for Fuel Conservation and Green Environment. International Conference on Energy Systems and Policies . Air University; Islamabad. 2014-11-24 - 2014-11-27.
  • Rabbani, Tariq; Saif, Muahmmad; Siddiqui, Muhammad Salman; Akhtar, Imran; Durrani, Naveed. (2014) Reduced Order Modeling Of Loads On A Vertical-Axis Wind Turbine. International Bhurban Conference on Applied Sciences and Technology . IEEE; Islamabad. 2014-01-15 - 2014-01-18.
  • Siddiqui, Muhammad Salman; Ahmad, Hamza; Shaheer, Muhammad. (2014) Numerical Simulation of a Compressed Air Driven Tesla Turbine. Power Conference . American Society of Mechanical Engineers (ASME); Baltimore, Maryland. 2014-07-28 - 2014-07-31.
  • Siddiqui, Muhammad Salman; Hassan, Syed Maaz. (2014) Optimized Design of a Straight Blade Urban Roof Top Vertical Axis Wind Turbine. International Conference on Energy Systems and Policies . Air University; Islamabad. 2014-11-24 - 2014-11-27.
  • Siddiqui, Muhammad Salman; Durrani, Naveed; Akhtar, Imran. (2013) Numerical Study to Quantify the Effects of Struts and Central Hub on the Performance of A Three Dimensional Vertical Axis Wind Turbine Using Sliding Mesh. Power Conference . American Society of Mechanical Engineers (ASME); Boston, Massachusetts. 2013-07-26 - 2013-07-31.
  • Suleman, Khali; Asim, Muhammad Saim; Kamran, Muhammad; Siddiqui, Muhammad Salman. (2013) Mathematical modeling of a single piston Gasoline Engine and Simulation of Efficiency Parameters. International Conference on Modeling and Simulation . Air University; Islamabad. 2013-09-24 - 2013-09-27.
  • Kamran, Muhammad; Siddiqui, Muhammad Salman; Hassan, Syed Maaz. (2012) Comparison among Conventional Blocks and Bricks with Compressed Stabilized Earth Blocks. International Conference on Engineering Sciences . Institute of Chemical Engineering and Technology; 2012-02-28 - 2012-02-29.
  • Siddiqui, Muhammad Salman; Akhtar, Imran; Durrani, Naveed. (2012) Effect Of Third-Dimensionality On Vertical Axis Wind Turbine Blades: A Numerical Study. 2nd International Symposium on Frontiers of Computational Sciences . GIKI Institute of Engineering; Islamabad. 2012-06-28 - 2012-06-29.
  • Siddiqui, Muhammad Salman; Hassan, Syed Maaz; Kamran, Muahmmad. (2012) Quick Return, flexible flap angle mechanism for a flapping wing Micro Air Vehicle. International Conference on Engineering Sciences . Institute of Chemical Engineering and Technology; Lahore. 2012-02-28 - 2012-02-29.
  • Siddiqui, Muhammad Salman; Hassan, Syed Maaz; Kamran, Muahmmad. (2012) Stress Analysis for Active Flapping and Pitching Mechanism of an Micro Air Vehicle. International Conference on Engineering Sciences . Institute of Chemical Engineering and Technology; 2012-02-28 - 2012-02-29.
  • Hassan, Syed Maaz; Nadeem, Muhamms; Siddiqui, Muhammad Salman. (2011) An algorithm for the generation/selection of process plans based upon production rate. International Conference on Advance Modeling and Simulation . College of EME; NUST College of EME. 2011-06-17 - 2011-06-21.