2022

• Sara, Forisson; Hansson, Lars; Jose, Couceiro; Dick, Sandberg. (2022) Macroscopic X-ray computed tomography aided numerical modelling of moisture flow in sawn timber. European Journal of Wood and Wood Products. volum 80.
  Vitenskapelig artikkel

2021

• Huber, Johannes; Ekevad, Mats; Broman, Olof; Oja, Johan; Hansson, Lars. (2021) A Method for Generating Finite Element Models of Wood Boards from X-Ray Computed Tomography Scans. Computers & structures. volum 260.
  Vitenskapelig artikkel
• Lunde, Arnhild; Hansson, Lars. (2021) Tverrfagleg samarbeid i matematikk og mekanikk med aktiv studentdeltaking. Nordic Journal of STEM Education. volum 5 (1).
  Vitenskapelig artikkel

2020

• Couceiro, José; Hansson, Lars; Sehlstedt-Persson, Margot; Vikberg, Tommy; Sandberg, Dick. (2020) The conditioning regime in industrial drying of Scots pine sawn timber studied by X-ray computed tomography - A case-study. European Journal of Wood and Wood Products. volum 78.
  Vitenskapelig artikkel
• Golubevas, Ricardas; Stankeviciute, Zivile; Zarkov, Aleksej; Golubevas, Raimundas; Hansson, Lars; Raudonis, Rimantas; Kareivaa, Aivaras; Garskaite, Edita. (2020) Acrylate–gelatin–carbonated hydroxyapatite (cHAP) composites for dental bone-tissue applications. Materials Advances. volum 1 (6).
  Vitenskapelig artikkel

2019

• Jose, Couceiro; Lindgren, Owe; Hansson, Lars; Söderström, Ove; Sandberg, Dick. (2019) Real-time wood moisture-content determination using dual-energy X-ray computed tomography scanning. Wood Material Science & Engineering. volum 14 (6).
  Vitenskapelig artikkel

2017

• Couceiro, José; Sehlstedt-Persson, Margot; Hansson, Lars; Hagman, Olle; Sandberg, Dick. (2017) CT Scanning of Capillary Phenomena in Bio-Based Materials. Pro Ligno. volum 13 (4).
  Vitenskapelig artikkel
• Hansson, Lars; Couceiro, José; Fjellner, Bengt-Arne. (2017) Estimation of shrinkage coefficients in radial and tangential directions from CT images. Wood Material Science & Engineering. volum 12 (4).
  Vitenskapelig artikkel

2013

• Ahmed, Sheikh Ali; Hansson, Lars; Morén, Tom. (2013) Distribution of preservatives in thermally modified Scots pine and Norway spruce sapwood. Wood Science and Technology. volum 47 (3).
  Vitenskapelig artikkel
• Ahmed, Sheikh Ali; Sehlstedt-Persson, Margot; Hansson, Lars; Morén, Tom. (2013) Evaluation of preservative distribution in thermally modified European aspen and birch boards using computed tomography and scanning electron microscopy. Journal of Wood Science. volum 59 (1).
  Vitenskapelig artikkel
• Hansson, Lars; Fjellner, Bengt-Arne. (2013) Wood shrinkage coefficient and dry weight moisture content estimations from CT-images. Pro Ligno. volum 9 (4).
  Vitenskapelig artikkel

2012

• Cherepanova, Ekaterina; Hansson, Lars. (2012) Determination of wood moisture properties using CT-scanner in a controlled high-temperature environment. Journal of Civil Engineering and Architecture. volum 6 (3).
  Vitenskapelig artikkel
• Hansson, Lars; Cherepanova, Ekaterina. (2012) Determination of wood moisture properties using a CT-scanner in a controlled low-temperature environment. Wood Material Science & Engineering. volum 7 (2).
  Vitenskapelig artikkel
• Vikberg, Tommy; Hansson, Lars; Schajer, Gary; Oja, Johan. (2012) Effects on microwave measurements and simulations when collecting data close to edges of wooden boards. Measurement (London). volum 45 (3).
  Vitenskapelig artikkel

2011

• Hansson, Lars; Cherepanova, Ekaterina; Morén, Tom. (2011) CT-scanning during heat treatment of wood. Pro Ligno. volum 7 (4).
  Vitenskapelig artikkel

2010

• Antti, Lena; Hansson, Lars. (2010) Equalization of moisture in pre-dried pinewood using microwave power. Pro Ligno. volum 6 (2).
  Vitenskapelig artikkel

2008

• Hansson, Lars; Antti, Lena. (2008) Modeling microwave heating and moisture redistribution in wood. Drying Technology. volum 26 (5).
  Vitenskapelig artikkel

2007

• Hansson, Lars. (2007) Microwave treatment of wood. 2007.
  Doktorgradsavhandling

2006

• Hansson, Lars; Antti, Lena. (2006) The effect of drying method and temperature level on the hardness of wood. Journal of Materials Processing Technology. volum 171 (3).
  Vitenskapelig artikkel
• Hansson, Lars; Lundgren, Nils; Antti, Lena; Hagman, Olle. (2006) Finite element modeling (FEM) simulation of interactions between wood and microwaves. Journal of Wood Science. volum 52 (5).
  Vitenskapelig artikkel

2005

• Hansson, Lars; Lundgren, Nils; Antti, Lena; Hagman, Olle. (2005) Microwave penetration in wood using imaging sensor. Measurement (London). volum 38 (1).
  Vitenskapelig artikkel

2003

• Hansson, Lars. (2003) Controlling microwave heating and its effect on the properties of wood. 2003. Licentiate thesis (Luleå tekniska universitet) (72).
  Lisensiatavhandling
• Hansson, Lars; Antti, A.L.. (2003) The effect of microwave drying on Norway spruce woods strength : a comparison with conventional drying. Journal of Materials Processing Technology. volum 141 (1).
  Vitenskapelig artikkel

2002

• Hansson, Lars. (2002) Styrprogram för temperaturhållning av last i mikrovågsugn. 2002.
  Rapport
• Hansson, Lars; Antti, Lena; Morén, Tom. (2002) IR- och HFV-teknik för virkestorkning. 2002.
  Rapport