Filippo Berto

Om

General information

Date of Birth: 12 February 1978

Place of Birth: Vicenza (Italy)

Citizenship: Italian

Residence: Stadsing Dahls Gate, Trondheim (Norway)

Position and Recognitions

NTNU Excellence Program
International Chair
Stephen Timoshenko fellow 2018 at Stanford University (https://mechanics.stanford.edu/timoshenko/timoshenko-scholars)
Award of Merit 2018 from ESIS (https://www.structuralintegrity.eu/site/people/award)
ESIS Wohler Medal 2020 (https://www.vecf1.eu/home/awards)
Vice-President Italian Group of Fracture (IGF, https://www.gruppofrattura.eu/)
Chair of ESIS TC15 (https://sites.google.com/structuralintegrity.eu/tc15)
European Editor of FFEMS (https://onlinelibrary.wiley.com/journal/14602695)
Member of NTVA (https://www.ntva.no/medlemmer/filippo-berto/)
Top Italian Scientist (TIS, http://www.topitalianscientists.org/home)
Editor in Chief of Material Design and Processing Communication (https://onlinelibrary.wiley.com/journal/25776576)
IGF Medal (https://www.gruppofrattura.eu/about-us/igf-awards)
Distinguished Changjiang Chair Professor of XJTU

Current research topics

Physical and mechanical properties of traditional and innovative metals (mainly aluminium, magnesium and titanium alloys) with particular attention to multiscale problems related to damage and degradation due to in service loadings.
Physical and mechanical properties of additively manufacture metals (mainly titanium Ti6Al4V and aluminium AlSi10Mg, but also Inconel 718 and stainless steel 316L).
Physical and mechanical properties of innovative solid-state multi-metals weldments (Mainly aluminium-steel joints but also copper-aluminium and titanium-copper joints)
Fracture and fatigue behaviour of metallic weldments (mainly made of steel and aluminium)
Physical and mechanical properties of graphite/graphene and pure lead (and its alloys) used for nuclear applications (CERN)
Fracture and Fatigue behaviour under complex loading and environmental conditions of metallic materials (CrMoV steels, aluminium alloys, magnesium alloys, titanium alloys)
Local approaches for fatigue and fracture design of metallic materials
Bioinspired design of metal structures
SEM/TEM characterization of crack initiation and propagation in metallic materials (aluminium and titanium alloys)
Mechanical and physical properties of magnesium alloys for biomedical applications (mainly for Mg AZ31)
Advanced techniques for coatings of metals
Advanced metals for energy transportation and storage
Data driven approaches in material science

Main courses

Mechanical Behavior of metals TMM4140
Fracture mechanics of metals TMM4160
Fatigue of metals TMM4195

Previous courses

MM8404 Today's view of multiscale fractures and plasticity (2018)
MM8404 Today's view of multiscale fractures and plasticity (2019)
MM8410 Additive Production With Advanced Alloy (2017)
MM8410 Additive Production With Advanced Alloy (2018)
TMM4140 Materials Mechanical Behavior (2018)
TMM4140 Materials Mechanical Behavior (2019)
TMM4550 Nanotechnology (2017)
TMM4550 Nanotechnology (2018)

Responsible for Erasmus flux with University of Padua, University of Parma, University of Madrid, University of Bologna and University of Messina. He is responsible for the international relationship between MTP and the University of Kyoto, Aalto University and Southampton University.

Editorial and communication activities

Since January 2015 he is European Editor of Fatigue and Fracture of Engineering Materials and Structures (Wiley).

http://onlinelibrary.wiley.com/journal/10.1111/%28ISSN%291460-2695

Since 2018 he is Editor in Chief of Material Design & Processing Communications (Wiley)

http://onlinelibrary.wiley.com/journal/25776576

He is in the editorial board of prestigious journals:

Theoretical and Applied Fracture Mechanics (Elsevier)
Strength of Materials (Springer)
Physical Mesomechanics (Springer)
Materials Science Engineering A (Elsevier)
Materials and Design (Elsevier)
International Journal of Fatigue (Elsevier)
Journal of Testing and Evaluation (ASTM)
Advanced Engineering Materials (Wiley)
International Journal of Damage Mechanics (Sage)
Polymer testing (Elsevier)

International links

Prof. Berto gives regular keynote and plenary lectures at major international conferences on engineering materials, fatigue and fracture. He maintains extensive international links, through past and current visiting appointments at: University of Oxford and Trinity college, Waterloo University, University of Adelaide, Ritsumeikan University, Kyoto University, East China University of Science and Technology, Imperial College, Kjushu University, Georgia Tech, Northwestern University, Brown University, Cornell University, Harvard University, Berkeley University, University of Toledo, University of Manchester, Zhejiang University of Technology China, Massachusetts institute of technology, The Hong Kong Polytechnic University – PolyU, Politechnika Bialostocka, East China University of Science and Technology, Aalto University, Hong Kong University, Northern Illinois University Virginia Tech, Chinese Academy of science, Ecole Polytechnique de Lousain, Purdue University, Siberian academy of science, Hong Kong Polithecnical University, University of Arkansas, Monash University, Tohoku University, Southampton University, Sheffield University, The University of Texas, Tongji University - Shangai, Iran University of Science and Technology.

He is honorary adjunct full professor at

Hong Kong Polytechnique University

Mandela University South Africa

Awards

He has received several international awards for his research and teaching activity.

Best teacher award a.y. 2011/12
Best teacher award a.y. 2012/13
Best teacher award a.y. 2013/14
‘Sih golden medal, junior prize’ at the conference Mesomechanics 2012
Capocaccia prize 2013 at AIAS conference
Elsevier Reviewer Award 2013
Elsevier Reviewer Award 2014
Elsevier Reviewer Award 2015
Elsevier Reviewer Award 2016
Ucimu award 2016
Top cited paper in 2012 in FFEMS
Top cited paper in 2013 in FFEMS
Top citep paper in 2014 in FFEMS

Since 2004, 780 papers have been published, mainly on prestigious international Journals (see Google Scholar database). It gives almost 16000 citations and H-index=71.

Industry collaboration and projects

Prof. Berto has considerable experience in materials science, fatigue of metals, fracture and mechanical testing related to steels, aluminum alloys, hardmetals, ceramics and polymers, together with a good metallurgical knowledge of their microstructures and properties. He has significant expertise in fatigue design for machine components and welded structures (plus welding processes and metallurgy), fatigue life prediction, engineering defect assessment, failure analysis, stress analysis, fractography, and materials selection. He has been involved in numerous projects funded both by the University of Padova , by the Italian Ministry of University and Research and by private companies. He is partecipating as main investigator to several EU pojects and all together in his career he was able to attract huge funding for research activities. Main ongoing projects are related to industrial collaborations with Cimolai, Zincherie Valbrenta, Omera, Officine Meccaniche Zanetti, Rolls Royce, Sintef, Nexans and many others.

Membership

He is member of the following associations:

International Member of ESIS
International member of the society of mesomechanics
ESIS TC10 member - Environmentally Assisted Cracking
Consultant of the Chinese Academy of Science and reviewer for international projects
Honorary member of the Athens Institute for Education and Research
Co-Chair of the Red Española de Fractura en Entallas
Member of the Engineering Integrity Society
Member of the ESIS TC committee on Finite Fracture Mechanics
Voting member of ASTM E08-Committee Fatigue and Fracture
ASME International Member
ASTM International Member
Chair of the ESIS Technical Committee on Fatigue, Residual Stress, Microstructure of Additive Manufactured Components

Dr. Berto has graduated more than 20 PhDs students as main supervisor.

Publikasjoner

2023

Akbari, M.; Aliha, M.R.M.; Berto, Filippo. (2023) Investigating the role of different components of friction stir welding tools on the generated heat and strain. Forces in Mechanics. volum 10.
Vitenskapelig artikkel
Ermakova, Anna; Braithwaite, Jarryd; Razavi, Seyed Mohammad Javad; Ganguly, Supriyo; Berto, Filippo; Mehmanparast, Ali. (2023) The influence of laser shock peening on corrosion-fatigue behaviour of wire arc additively manufactured components. Surface & Coatings Technology. volum 456.
Vitenskapelig artikkel
Ermakova, Anna; Razavi, Seyed Mohammad Javad; Crescenzo, Rocco; Berto, Filippo; Mehmanparast, Ali. (2023) Fatigue life assessment of wire arc additively manufactured ER100S-1 steel parts. Progress in Additive Manufacturing.
Vitenskapelig artikkel
Karakaş, Özler; Kardeş, Feride Buket; Foti, Pietro; Berto, Filippo. (2023) An overview of factors affecting high-cycle fatigue of additive manufacturing metals. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Marsavina, Liviu; Moreira, Pedro; Berto, Filippo; Gao, Chao; Razavi, Seyed Mohammad Javad. (2023) Editorial VSI Fracture behavior of additively manufactured materials and structures. Engineering Fracture Mechanics. volum 277.
Leder
Monfared, Vahid; Bakhsheshi-Rad, Hamid Reza; Razzaghi, Mahmood; Toghraie, D.; Hekmatifar, Maboud; Berto, Filippo. (2023) A Review Study for Creep in Different Nanocomposites. Metals and Materials International.
Vitenskapelig oversiktsartikkel/review
Prentkovskis, Olegas; Maruschak, Pavlo; Panin, Sergey; Berto, Filippo. (2023) Application of Alloys in Transport. Metals. volum 13 (1).
Leder
Song, Wei; Xia, Xiaolei; Wei, Shoupan; Shi, Xiaojian; Cui, Muchun; Li, Zhutie; Berto, Filippo. (2023) Fatigue failure investigation of thick plate butt-welded joints with incomplete penetration effect. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Song, Wei; Yang, Feng; He, Min; Shi, Duanhu; Zhou, Guangtao; Xia, Hongbo; Chen, Nannan; Berto, Filippo. (2023) Comprehensive fatigue assessment for different types of aluminum fillet welded joints by local approaches. Thin-walled structures. volum 185.
Vitenskapelig artikkel
Vantadori, Sabrina; Berto, Filippo; António Correia, José; Iacoviello, Francesco. (2023) Preface on Special issue: “Crack Paths 2021” after CP2021. Engineering Failure Analysis. volum 143 (A).
Leder

2022

Alberti, Fabio; Foti, Pietro; Berto, Filippo; Risitano, Giacomo; D'Andrea, Danilo. (2022) Fatigue life evaluation of automotive mechanical components by using smart design algorithm. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Bakhtiari-Zamani, Hassan; Saebnoori, Ehsan; Bakhsheshi-Rad, Hamid Reza; Berto, Filippo. (2022) Corrosion and Wear Behavior of TiO<inf>2</inf>/TiN Duplex Coatings on Titanium by Plasma Electrolytic Oxidation and Gas Nitriding. Materials. volum 15 (23).
Vitenskapelig artikkel
Bellini, C; Berto, Filippo; Di Cocco, V; Franchitti, S; Iacoviello, Francesco; Mocanu, Larisa Patricia; Razavi, Seyed Mohammad Javad. (2022) Effect of recycling on internal and external defects of Ti-6Al-4V powder particles for electron beam melting process. Procedia Structural Integrity. volum 41.
Vitenskapelig artikkel
Cai, Xiao; Tang, Keke; Ferro, Paolo; Berto, Filippo. (2022) Coordinated effect of microstructure and defect on fatigue accumulation in dual-phase Ti-6Al-4V: Quantitative characterization. International Journal of Fatigue. volum 167 (A).
Vitenskapelig artikkel
Cecchel, Silvia; Razavi, Seyed Mohammad Javad; Mega, Francesco; Cornacchia, Giovanna; Avanzini, Andrea; Battini, Davide; Berto, Filippo. (2022) Numerical, Mechanical, and Metallurgical analyses of an innovative lightweight titanium conrod additively manufactured. Procedia Structural Integrity. volum 41.
Vitenskapelig artikkel
Cesarano, Francesco; Maurizi, Marco; Gao, Chao; Berto, Filippo; Penta, Francesco; Bertolin, Chiara. (2022) Preliminary optimization of shape memory polymers geometric parameters to enhance the thermal loads' activation range. Procedia Structural Integrity. volum 42.
Vitenskapelig artikkel
Cesarano, Francesco; Maurizi, Marco; Gao, Chao; Berto, Filippo; Penta, Francesco; Bertolin, Chiara. (2022) Preliminary results on the optimization of shape memory polymers geometric parameters to enhance the thermal loads activation range. European Conference on Fracture - ECF23 book of abstract.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
du Plessis, Anton; Razavi, Seyed Mohammad Javad; Benedetti, Matteo; Murchio, Simone; Leary, Martin; Watson, Marcus; Bhate, Dhruv; Berto, Filippo. (2022) Properties and applications of additively manufactured metallic cellular materials: A review. Progress in Materials Science. volum 125.
Vitenskapelig oversiktsartikkel/review
Du Plessis, Anton; Razavi, Seyed Mohammad Javad; Wan, Di; Berto, Filippo; Imdaadulah, Adam; Beamer, Chad; Shipley, James; MacDonald, Eric. (2022) Fatigue performance of shelled additively manufactured parts subjected to hot isostatic pressing. Additive Manufacturing. volum 51.
Vitenskapelig artikkel
Ermakova, Anna; Razavi, Seyed Mohammad Javad; Berto, Filippo; Mehmanparast, Ali. (2022) Uniaxial and multiaxial fatigue behaviour of wire arc additively manufactured ER70S-6 low carbon steel components. International Journal of Fatigue. volum 166.
Vitenskapelig artikkel
Foti, Pietro; Berto, Filippo. (2022) Some useful expressions and a proof of the validity of the volume free procedure for the SED method application. Engineering Fracture Mechanics. volum 274.
Vitenskapelig artikkel
Foti, Pietro; Mocanu, LP; Razavi, Seyed Mohammad Javad; Bellini, C; Borrelli, R; Di Cocco, V; Francitti, S; Iacoviello, Francesco; Berto, Filippo. (2022) Effect of recycling powder on the fatigue properties of AM Ti6Al4V. Procedia Structural Integrity. volum 42.
Vitenskapelig artikkel
Ghahferokhi, Ali Izadi; Kasiri-Asgarani, Masoud; Ebrahimi-Kahrizsangi, Reza; Rafiei, Mahdi; Bakhsheshi-Rad, Hamid Reza; Amini, Kamran; Berto, Filippo. (2022) Effect of bonding temperature and bonding time on microstructure of dissimilar transient liquid phase bonding of GTD111/BNi-2/IN718 system. Journal of Materials Research and Technology (JMR&T). volum 21.
Vitenskapelig artikkel
Grbovic, Aleksandar; Sedmak, Aleksandar; Petrovski, Blagoj; Sghayer, Abulgasem; Sedmak, Simon; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2022) Numerical simulation of fatigue crack growth in AA6156 T6 panels. Procedia Structural Integrity. volum 39.
Vitenskapelig artikkel
Lei, Ruide; Berto, Filippo; Hu, Chao; Lu, Zhaohui; Yan, Xufeng. (2022) Early-warning signal recognition methods in flawed sandstone subjected to uniaxial compression. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Maurizi, Marco; Gao, Chao; Berto, Filippo. (2022) Inverse design of truss lattice materials with superior buckling resistance. npj Computational Materials. volum 8 (1).
Vitenskapelig artikkel
Maurizi, Marco; Gao, Chao; Berto, Filippo. (2022) Predicting stress, strain and deformation fields in materials and structures with graph neural networks. Scientific Reports. volum 12 (1).
Vitenskapelig artikkel
Salahshouri, Fatemeh; Saebnoori, Ehsan; Borghei, Sina; Mossahebi-Mohammadi, Majid; Bakhsheshi-Rad, Hamid Reza; Berto, Filippo. (2022) Plasma electrolytic oxidation (PEO) coating on γ-TiAl alloy: Investigation of bioactivity and corrosion behavior in simulated body fluid. Metals. volum 12:1866 (11).
Vitenskapelig artikkel
Sepe, Raffaele; Giannella, V; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2022) Characterization of static, fatigue and fracture behaviour of the aluminium-lithium alloy Al-Li 2198-T851. International Journal of Fatigue. volum 166.
Vitenskapelig artikkel
Spagnoli, Andrea; alberini, r; Berto, Filippo; Bertolin, Chiara; Brighenti, Roberto. (2022) Tailored distribution of defects in thin sheets to control their wrinkling. European Conference on Fracture - ECF23 book of abstract.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Spiller, Saveria; Berto, Filippo; Razavi, Seyed Mohammad Javad. (2022) Mechanical behavior of Material Extrusion Additive Manufactured components: an overview. Procedia Structural Integrity. volum 41.
Vitenskapelig oversiktsartikkel/review
Vantadori, Sabrina; Berto, Filippo; Carpinteri, Andrea; Natali, Stefano. (2022) Preface on Special issue: “Fatigue Crack Paths 2021” after CP2021. International Journal of Fatigue. volum 166.
Leder
Viespoli, Luigi Mario; Johanson, Audun; Dumoulin, Stephane; Hagen, Anette Brocks; Wan, Di; Berto, Filippo; Alvaro, Antonio. (2022) Impact of conductor assembly indentation on the fatigue properties of copper power cable wires. Procedia Structural Integrity. volum 42.
Vitenskapelig artikkel
Wu, W; Xia, R; Qian, G; Liu, Z; Razavi, Seyed Mohammad Javad; Berto, Filippo; Gao, H. (2022) Mechanostructures: rational mechanical design, fabrication, performance evaluation, and industrial application of advanced structures. Progress in Materials Science. volum 131.
Vitenskapelig oversiktsartikkel/review
Xin, Haohui; Liu, Jielin; Correia, Jose A.F.; Berto, Filippo; Veljkovic, Milan; Yang, Fei. (2022) Strengthening effects evaluation on fatigue damage of rib to deck joint in orthotropic steel deck. Engineering Failure Analysis. volum 145.
Vitenskapelig artikkel
Xin, Haohui; Liu, Jielin; Correia, José A.F.O.; Berto, Filippo; Veljkovic, Milan; Qian, Guian. (2022) Mixed-mode fatigue crack propagation simulation by means of G<inf>eq</inf> and walker models of the structural steel S355. Theoretical and applied fracture mechanics (Print). volum 123.
Vitenskapelig artikkel
Zhang, Mingyang; Zhao, Ning; Yu, Qin; Liu, Zengqian; Qu, Ruitao; Zhang, Jian; Li, Shujun; Ren, Dechun; Berto, Filippo; Zhang, Zhefeng; Ritchie, Robert O.. (2022) On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures. Nature Communications. volum 13.
Vitenskapelig artikkel
ziad, a; giordano, cristophe; aresta, a; Aristidi, e; Bailet, c; Berto, Filippo; Bertolin, Chiara; Carbillet, M.; Cavazzani, Stefano; Ceus, d; Charbonnel, t; Delanoë, Julien; Descloitres, Jacques; Fanteï-Caujolle, y; Gillioën, a; Gonzales-Ramos, Y; Irbah, a; Jacqmart, e; Le Kernec, a; Liandrat, o; Poulenard, s; Riedi, Jerome; Schmutz, n; Victori, Stephane. (2022) ANAtOLIA : a new mobile site-testing station for Astronomy and Optical Communications. Proceedings of SPIE, the International Society for Optical Engineering.
Vitenskapelig artikkel

2021

Benedetti, M.; Du Plessis, Anton; Ritchie, R.O.; Dallago, M.; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2021) Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication. Materials science & engineering. R, Reports. volum 144.
Vitenskapelig oversiktsartikkel/review
Blakey-Milner, Byron; Gradl, Paul; Snedden, Glen; Brooks, Michael; Pitot, Jean; Lopez, Elena; Leary, Martin; Berto, Filippo; Du Plessis, Anton. (2021) Metal additive manufacturing in aerospace: A review. Materials & design. volum 209.
Vitenskapelig artikkel
Kanyilmaz, Alper; Demir, AG; Chierici, M.; Berto, Filippo; Gardner, L; Kandukuri, SY; Kassabian, P; Kinoshita, T; Laurenti, A; Paoletti, I; Du Plessis, Anton; Razavi, Seyed Mohammad Javad. (2021) Role of Metal 3D Printing to Increase Quality and Resource-efficiency in the Construction Sector. Additive Manufacturing. volum 50.
Vitenskapelig oversiktsartikkel/review
Shanmugam, Vigneshwaran; Das, Oisik; Babu, Karthik; Marimuthu, Uthayakumar; Veerasimman, Arumugaprabu; Johnson, Deepak Joel; Neisiany, Rasoul Esmaeely; Hedenqvist, Mikael S.; Ramakrishna, Seeram; Berto, Filippo. (2021) Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials. International Journal of Fatigue. volum 143.
Vitenskapelig artikkel

2020

Moiseenko, D.D.; Maksimov, P.V.; Panin, S.V.; Schmauder, S.; Panin, V.E.; Babich, D.S.; Berto, Filippo; Vinogradov, Alexei; Brückner-Foit, A.. (2020) Recrystallization at Crack Surfaces as a Specific Fracture Mechanism at Elevated Temperatures—Cellular Automata Simulation. Physical Mesomechanics. volum 23 (1).
Vitenskapelig artikkel

2018

Ayatollahi, M.R.; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2018) Crack path stability in brittle fracture under pure mode i loading. Procedia Structural Integrity. volum 13.
Vitenskapelig artikkel
Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.; Berto, Filippo. (2018) Assessment of fatigue crack growth behavior of cracked specimens repaired by indentation. Procedia Structural Integrity. volum 13.
Vitenskapelig artikkel
Solberg, Klas; Torgersen, Jan; Berto, Filippo. (2018) Fatigue Behaviour of Additively Manufactured Inconel 718 Produced by Selective Laser Melting. Procedia Structural Integrity. volum 13.
Vitenskapelig artikkel

2017

Berto, Filippo; Marsavina, L.; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) On the fracture behavior of polyurethane notched components. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Fatigue behaviour of notched specimens made of 40CrMoV13.9 under multiaxial loading. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Multiaxial fracture of graphite components: A review of recent results. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.; Mutignani, F.. (2017) Mechanical behavior of hot-dip galvanized welded steel under cyclic loading. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Campagnolo, A.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Some recent criteria for brittle fracture prediction under in-plane shear loading. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Colussi, M.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Experimental and numerical investigations of fracture behavior of magnetostrictive materials. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Ferro, P.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) The effect of residual stress on fatigue behavior of V-notched components: A review. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Ferro, P.; Colussi, M.; Meneghetti, G.; Berto, Filippo; Lachin, M.; Castiglione, S.A.. (2017) On the use of the Peak Stress Method for the calculation of Residual Notch Stress Intensity Factors: A preliminary investigation. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Gallo, P.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Non-localized creep assessment of V-notched components: A review. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel

2016

Berto, Filippo; Gagani, Abedin; Aversa, Raffaella; Petrescu, Relly Victoria V.; Apicella, Antonio; Petrescu, Florian Ion T.. (2016) Multiaxial fatigue strength to notched specimens made of 40CrMoV13.9. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig artikkel
Berto, Filippo; Gagani, Abedin; Petrescu, Relly Victoria V.; Petrescu, Florian Ion T.. (2016) Key-hole notches in isostatic graphite: A review of some recent data. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig oversiktsartikkel/review
Berto, Filippo; Petrescu, Relly Victoria V.; Petrescu, Florian Ion T.. (2016) A review of recent results on 3D effects. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig oversiktsartikkel/review
Berto, Filippo; Petrescu, Relly Victoria V.; Petrescu, Florian Ion T.. (2016) Three-dimensional in bonded joints: A short review. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig oversiktsartikkel/review

Tidsskriftspublikasjoner

Akbari, M.; Aliha, M.R.M.; Berto, Filippo. (2023) Investigating the role of different components of friction stir welding tools on the generated heat and strain. Forces in Mechanics. volum 10.
Vitenskapelig artikkel
Ermakova, Anna; Braithwaite, Jarryd; Razavi, Seyed Mohammad Javad; Ganguly, Supriyo; Berto, Filippo; Mehmanparast, Ali. (2023) The influence of laser shock peening on corrosion-fatigue behaviour of wire arc additively manufactured components. Surface & Coatings Technology. volum 456.
Vitenskapelig artikkel
Ermakova, Anna; Razavi, Seyed Mohammad Javad; Crescenzo, Rocco; Berto, Filippo; Mehmanparast, Ali. (2023) Fatigue life assessment of wire arc additively manufactured ER100S-1 steel parts. Progress in Additive Manufacturing.
Vitenskapelig artikkel
Karakaş, Özler; Kardeş, Feride Buket; Foti, Pietro; Berto, Filippo. (2023) An overview of factors affecting high-cycle fatigue of additive manufacturing metals. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Marsavina, Liviu; Moreira, Pedro; Berto, Filippo; Gao, Chao; Razavi, Seyed Mohammad Javad. (2023) Editorial VSI Fracture behavior of additively manufactured materials and structures. Engineering Fracture Mechanics. volum 277.
Leder
Monfared, Vahid; Bakhsheshi-Rad, Hamid Reza; Razzaghi, Mahmood; Toghraie, D.; Hekmatifar, Maboud; Berto, Filippo. (2023) A Review Study for Creep in Different Nanocomposites. Metals and Materials International.
Vitenskapelig oversiktsartikkel/review
Prentkovskis, Olegas; Maruschak, Pavlo; Panin, Sergey; Berto, Filippo. (2023) Application of Alloys in Transport. Metals. volum 13 (1).
Leder
Song, Wei; Xia, Xiaolei; Wei, Shoupan; Shi, Xiaojian; Cui, Muchun; Li, Zhutie; Berto, Filippo. (2023) Fatigue failure investigation of thick plate butt-welded joints with incomplete penetration effect. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Song, Wei; Yang, Feng; He, Min; Shi, Duanhu; Zhou, Guangtao; Xia, Hongbo; Chen, Nannan; Berto, Filippo. (2023) Comprehensive fatigue assessment for different types of aluminum fillet welded joints by local approaches. Thin-walled structures. volum 185.
Vitenskapelig artikkel
Vantadori, Sabrina; Berto, Filippo; António Correia, José; Iacoviello, Francesco. (2023) Preface on Special issue: “Crack Paths 2021” after CP2021. Engineering Failure Analysis. volum 143 (A).
Leder
Alberti, Fabio; Foti, Pietro; Berto, Filippo; Risitano, Giacomo; D'Andrea, Danilo. (2022) Fatigue life evaluation of automotive mechanical components by using smart design algorithm. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Bakhtiari-Zamani, Hassan; Saebnoori, Ehsan; Bakhsheshi-Rad, Hamid Reza; Berto, Filippo. (2022) Corrosion and Wear Behavior of TiO<inf>2</inf>/TiN Duplex Coatings on Titanium by Plasma Electrolytic Oxidation and Gas Nitriding. Materials. volum 15 (23).
Vitenskapelig artikkel
Bellini, C; Berto, Filippo; Di Cocco, V; Franchitti, S; Iacoviello, Francesco; Mocanu, Larisa Patricia; Razavi, Seyed Mohammad Javad. (2022) Effect of recycling on internal and external defects of Ti-6Al-4V powder particles for electron beam melting process. Procedia Structural Integrity. volum 41.
Vitenskapelig artikkel
Cai, Xiao; Tang, Keke; Ferro, Paolo; Berto, Filippo. (2022) Coordinated effect of microstructure and defect on fatigue accumulation in dual-phase Ti-6Al-4V: Quantitative characterization. International Journal of Fatigue. volum 167 (A).
Vitenskapelig artikkel
Cecchel, Silvia; Razavi, Seyed Mohammad Javad; Mega, Francesco; Cornacchia, Giovanna; Avanzini, Andrea; Battini, Davide; Berto, Filippo. (2022) Numerical, Mechanical, and Metallurgical analyses of an innovative lightweight titanium conrod additively manufactured. Procedia Structural Integrity. volum 41.
Vitenskapelig artikkel
Cesarano, Francesco; Maurizi, Marco; Gao, Chao; Berto, Filippo; Penta, Francesco; Bertolin, Chiara. (2022) Preliminary optimization of shape memory polymers geometric parameters to enhance the thermal loads' activation range. Procedia Structural Integrity. volum 42.
Vitenskapelig artikkel
du Plessis, Anton; Razavi, Seyed Mohammad Javad; Benedetti, Matteo; Murchio, Simone; Leary, Martin; Watson, Marcus; Bhate, Dhruv; Berto, Filippo. (2022) Properties and applications of additively manufactured metallic cellular materials: A review. Progress in Materials Science. volum 125.
Vitenskapelig oversiktsartikkel/review
Du Plessis, Anton; Razavi, Seyed Mohammad Javad; Wan, Di; Berto, Filippo; Imdaadulah, Adam; Beamer, Chad; Shipley, James; MacDonald, Eric. (2022) Fatigue performance of shelled additively manufactured parts subjected to hot isostatic pressing. Additive Manufacturing. volum 51.
Vitenskapelig artikkel
Ermakova, Anna; Razavi, Seyed Mohammad Javad; Berto, Filippo; Mehmanparast, Ali. (2022) Uniaxial and multiaxial fatigue behaviour of wire arc additively manufactured ER70S-6 low carbon steel components. International Journal of Fatigue. volum 166.
Vitenskapelig artikkel
Foti, Pietro; Berto, Filippo. (2022) Some useful expressions and a proof of the validity of the volume free procedure for the SED method application. Engineering Fracture Mechanics. volum 274.
Vitenskapelig artikkel
Foti, Pietro; Mocanu, LP; Razavi, Seyed Mohammad Javad; Bellini, C; Borrelli, R; Di Cocco, V; Francitti, S; Iacoviello, Francesco; Berto, Filippo. (2022) Effect of recycling powder on the fatigue properties of AM Ti6Al4V. Procedia Structural Integrity. volum 42.
Vitenskapelig artikkel
Ghahferokhi, Ali Izadi; Kasiri-Asgarani, Masoud; Ebrahimi-Kahrizsangi, Reza; Rafiei, Mahdi; Bakhsheshi-Rad, Hamid Reza; Amini, Kamran; Berto, Filippo. (2022) Effect of bonding temperature and bonding time on microstructure of dissimilar transient liquid phase bonding of GTD111/BNi-2/IN718 system. Journal of Materials Research and Technology (JMR&T). volum 21.
Vitenskapelig artikkel
Grbovic, Aleksandar; Sedmak, Aleksandar; Petrovski, Blagoj; Sghayer, Abulgasem; Sedmak, Simon; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2022) Numerical simulation of fatigue crack growth in AA6156 T6 panels. Procedia Structural Integrity. volum 39.
Vitenskapelig artikkel
Lei, Ruide; Berto, Filippo; Hu, Chao; Lu, Zhaohui; Yan, Xufeng. (2022) Early-warning signal recognition methods in flawed sandstone subjected to uniaxial compression. Fatigue & Fracture of Engineering Materials & Structures (FFEMS).
Vitenskapelig artikkel
Maurizi, Marco; Gao, Chao; Berto, Filippo. (2022) Inverse design of truss lattice materials with superior buckling resistance. npj Computational Materials. volum 8 (1).
Vitenskapelig artikkel
Maurizi, Marco; Gao, Chao; Berto, Filippo. (2022) Predicting stress, strain and deformation fields in materials and structures with graph neural networks. Scientific Reports. volum 12 (1).
Vitenskapelig artikkel
Salahshouri, Fatemeh; Saebnoori, Ehsan; Borghei, Sina; Mossahebi-Mohammadi, Majid; Bakhsheshi-Rad, Hamid Reza; Berto, Filippo. (2022) Plasma electrolytic oxidation (PEO) coating on γ-TiAl alloy: Investigation of bioactivity and corrosion behavior in simulated body fluid. Metals. volum 12:1866 (11).
Vitenskapelig artikkel
Sepe, Raffaele; Giannella, V; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2022) Characterization of static, fatigue and fracture behaviour of the aluminium-lithium alloy Al-Li 2198-T851. International Journal of Fatigue. volum 166.
Vitenskapelig artikkel
Spiller, Saveria; Berto, Filippo; Razavi, Seyed Mohammad Javad. (2022) Mechanical behavior of Material Extrusion Additive Manufactured components: an overview. Procedia Structural Integrity. volum 41.
Vitenskapelig oversiktsartikkel/review
Vantadori, Sabrina; Berto, Filippo; Carpinteri, Andrea; Natali, Stefano. (2022) Preface on Special issue: “Fatigue Crack Paths 2021” after CP2021. International Journal of Fatigue. volum 166.
Leder
Viespoli, Luigi Mario; Johanson, Audun; Dumoulin, Stephane; Hagen, Anette Brocks; Wan, Di; Berto, Filippo; Alvaro, Antonio. (2022) Impact of conductor assembly indentation on the fatigue properties of copper power cable wires. Procedia Structural Integrity. volum 42.
Vitenskapelig artikkel
Wu, W; Xia, R; Qian, G; Liu, Z; Razavi, Seyed Mohammad Javad; Berto, Filippo; Gao, H. (2022) Mechanostructures: rational mechanical design, fabrication, performance evaluation, and industrial application of advanced structures. Progress in Materials Science. volum 131.
Vitenskapelig oversiktsartikkel/review
Xin, Haohui; Liu, Jielin; Correia, Jose A.F.; Berto, Filippo; Veljkovic, Milan; Yang, Fei. (2022) Strengthening effects evaluation on fatigue damage of rib to deck joint in orthotropic steel deck. Engineering Failure Analysis. volum 145.
Vitenskapelig artikkel
Xin, Haohui; Liu, Jielin; Correia, José A.F.O.; Berto, Filippo; Veljkovic, Milan; Qian, Guian. (2022) Mixed-mode fatigue crack propagation simulation by means of G<inf>eq</inf> and walker models of the structural steel S355. Theoretical and applied fracture mechanics (Print). volum 123.
Vitenskapelig artikkel
Zhang, Mingyang; Zhao, Ning; Yu, Qin; Liu, Zengqian; Qu, Ruitao; Zhang, Jian; Li, Shujun; Ren, Dechun; Berto, Filippo; Zhang, Zhefeng; Ritchie, Robert O.. (2022) On the damage tolerance of 3-D printed Mg-Ti interpenetrating-phase composites with bioinspired architectures. Nature Communications. volum 13.
Vitenskapelig artikkel
ziad, a; giordano, cristophe; aresta, a; Aristidi, e; Bailet, c; Berto, Filippo; Bertolin, Chiara; Carbillet, M.; Cavazzani, Stefano; Ceus, d; Charbonnel, t; Delanoë, Julien; Descloitres, Jacques; Fanteï-Caujolle, y; Gillioën, a; Gonzales-Ramos, Y; Irbah, a; Jacqmart, e; Le Kernec, a; Liandrat, o; Poulenard, s; Riedi, Jerome; Schmutz, n; Victori, Stephane. (2022) ANAtOLIA : a new mobile site-testing station for Astronomy and Optical Communications. Proceedings of SPIE, the International Society for Optical Engineering.
Vitenskapelig artikkel
Benedetti, M.; Du Plessis, Anton; Ritchie, R.O.; Dallago, M.; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2021) Architected cellular materials: A review on their mechanical properties towards fatigue-tolerant design and fabrication. Materials science & engineering. R, Reports. volum 144.
Vitenskapelig oversiktsartikkel/review
Blakey-Milner, Byron; Gradl, Paul; Snedden, Glen; Brooks, Michael; Pitot, Jean; Lopez, Elena; Leary, Martin; Berto, Filippo; Du Plessis, Anton. (2021) Metal additive manufacturing in aerospace: A review. Materials & design. volum 209.
Vitenskapelig artikkel
Kanyilmaz, Alper; Demir, AG; Chierici, M.; Berto, Filippo; Gardner, L; Kandukuri, SY; Kassabian, P; Kinoshita, T; Laurenti, A; Paoletti, I; Du Plessis, Anton; Razavi, Seyed Mohammad Javad. (2021) Role of Metal 3D Printing to Increase Quality and Resource-efficiency in the Construction Sector. Additive Manufacturing. volum 50.
Vitenskapelig oversiktsartikkel/review
Shanmugam, Vigneshwaran; Das, Oisik; Babu, Karthik; Marimuthu, Uthayakumar; Veerasimman, Arumugaprabu; Johnson, Deepak Joel; Neisiany, Rasoul Esmaeely; Hedenqvist, Mikael S.; Ramakrishna, Seeram; Berto, Filippo. (2021) Fatigue behaviour of FDM-3D printed polymers, polymeric composites and architected cellular materials. International Journal of Fatigue. volum 143.
Vitenskapelig artikkel
Moiseenko, D.D.; Maksimov, P.V.; Panin, S.V.; Schmauder, S.; Panin, V.E.; Babich, D.S.; Berto, Filippo; Vinogradov, Alexei; Brückner-Foit, A.. (2020) Recrystallization at Crack Surfaces as a Specific Fracture Mechanism at Elevated Temperatures—Cellular Automata Simulation. Physical Mesomechanics. volum 23 (1).
Vitenskapelig artikkel
Ayatollahi, M.R.; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2018) Crack path stability in brittle fracture under pure mode i loading. Procedia Structural Integrity. volum 13.
Vitenskapelig artikkel
Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.; Berto, Filippo. (2018) Assessment of fatigue crack growth behavior of cracked specimens repaired by indentation. Procedia Structural Integrity. volum 13.
Vitenskapelig artikkel
Solberg, Klas; Torgersen, Jan; Berto, Filippo. (2018) Fatigue Behaviour of Additively Manufactured Inconel 718 Produced by Selective Laser Melting. Procedia Structural Integrity. volum 13.
Vitenskapelig artikkel
Berto, Filippo; Marsavina, L.; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) On the fracture behavior of polyurethane notched components. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Fatigue behaviour of notched specimens made of 40CrMoV13.9 under multiaxial loading. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Multiaxial fracture of graphite components: A review of recent results. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.; Mutignani, F.. (2017) Mechanical behavior of hot-dip galvanized welded steel under cyclic loading. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Campagnolo, A.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Some recent criteria for brittle fracture prediction under in-plane shear loading. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Colussi, M.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Experimental and numerical investigations of fracture behavior of magnetostrictive materials. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Ferro, P.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) The effect of residual stress on fatigue behavior of V-notched components: A review. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Ferro, P.; Colussi, M.; Meneghetti, G.; Berto, Filippo; Lachin, M.; Castiglione, S.A.. (2017) On the use of the Peak Stress Method for the calculation of Residual Notch Stress Intensity Factors: A preliminary investigation. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Gallo, P.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Ayatollahi, M.R.. (2017) Non-localized creep assessment of V-notched components: A review. Procedia Structural Integrity. volum 3.
Vitenskapelig artikkel
Berto, Filippo; Gagani, Abedin; Aversa, Raffaella; Petrescu, Relly Victoria V.; Apicella, Antonio; Petrescu, Florian Ion T.. (2016) Multiaxial fatigue strength to notched specimens made of 40CrMoV13.9. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig artikkel
Berto, Filippo; Gagani, Abedin; Petrescu, Relly Victoria V.; Petrescu, Florian Ion T.. (2016) Key-hole notches in isostatic graphite: A review of some recent data. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig oversiktsartikkel/review
Berto, Filippo; Petrescu, Relly Victoria V.; Petrescu, Florian Ion T.. (2016) A review of recent results on 3D effects. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig oversiktsartikkel/review
Berto, Filippo; Petrescu, Relly Victoria V.; Petrescu, Florian Ion T.. (2016) Three-dimensional in bonded joints: A short review. American Journal of Engineering and Applied Sciences. volum 9 (4).
Vitenskapelig oversiktsartikkel/review

Del av bok/rapport

Cesarano, Francesco; Maurizi, Marco; Gao, Chao; Berto, Filippo; Penta, Francesco; Bertolin, Chiara. (2022) Preliminary results on the optimization of shape memory polymers geometric parameters to enhance the thermal loads activation range. European Conference on Fracture - ECF23 book of abstract.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel
Spagnoli, Andrea; alberini, r; Berto, Filippo; Bertolin, Chiara; Brighenti, Roberto. (2022) Tailored distribution of defects in thin sheets to control their wrinkling. European Conference on Fracture - ECF23 book of abstract.
Vitenskapelig Kapittel/Artikkel/Konferanseartikkel

Undervisning

Emner

Formidling

2022

Vitenskapelig foredrag

Bergh, Tina; Fyhn, Hursanay; Sandnes, Lise; Blindheim, Jørgen; Grong, Øystein; Holmestad, Randi; Berto, Filippo; Vullum, Per Erik. (2022) Hybrid metal extrusion & bonding for multi-material welding of aluminium alloys to copper, steel, and titanium. ICAA 18 ; Toyama. 2022-09-04 - 2022-09-08.
Faglig foredrag

Califano, America; Foti, Pietro; Berto, Filippo; Baiesi, M.; Bertolin, Chiara. (2022) Predicting crack initiation in panel paintings with machine learning. MedFract 2 . IGF - Gruppo Italiano Frattura; Catania. 2022-02-14 - 2022-02-16.
Vitenskapelig foredrag

Califano, America; Foti, Pietro; Berto, Filippo; baiesi, marco; Bertolin, Chiara. (2022) Predicting damage evolution in panel paintings with Machine Learning. Mediterranean Conference on Fracture . IGF; Catania. 2022-02-14 - 2022-02-16.
Poster

Celotto, Ambra; Grong, Øystein; Holmestad, Randi; Sørhaug, Jørgen A; Vullum, Per Erik; Wan, Di; Berto, Filippo. (2022) Unconventional use of Ga+ FIB and Xe+ Plasma-FIB for performing and investigating microscale cold-welding of dissimilar aluminium alloys. 1st National Junior Scientist Research Conference in Nanoscience and Nanotechnology . Research School TNNN; Trondheim. 2022-11-30 - 2022-12-02.
Faglig foredrag

Celotto, Ambra; Grong, Øystein; Holmestad, Randi; Vullum, Per Erik; Wan, Di; Sørhaug, Jørgen A; Berto, Filippo. (2022) Cold bonding aluminium in a Focused Ion Beam microscope: development and qualitative in-situ assessment of the microscale technique. 2nd Mediterranean Conference on Fracture and Structural Integrity (MedFract2) . AGFME, GSEMM, IGF, SEIE-GEF; Catania. 2022-02-14 - 2022-02-16.
Faglig foredrag

Celotto, Ambra; Grong, Øystein; Vullum, Per Erik; Wan, Di; Berto, Filippo. (2022) Microsaldature di alluminio allo stato solido tramite microscopio a fascio di ioni focalizzato. 39th National Conference of the Italian Association of Metallurgy . Italian Association of Metallurgy; Padova. 2022-09-21 - 2022-09-23.
Faglig foredrag

Celotto, Ambra; Grong, Øystein; Wan, Di; Vullum, Per Erik; Holmestad, Randi; Sørhaug, Jørgen A; Berto, Filippo. (2022) Cold Pressure Welding of aluminium: conventional and FIB-assisted microscale techniques. ECF23 European Conference on Fracture 2022 . ESIS European Structural Integrity Society; Madeira. 2022-06-27 - 2022-07-01.
Faglig foredrag

Liang, Li; Berto, Filippo; Gao, Chao. (2022) Bio-inspired core-shell architectured filament with tunable damage tolerance. 3rd International Workshop on Reliability and Design of Additively Manufactured Materials - RdAMM22 . SIRAMM; Belgrade, Serbia. 2022-10-04 - 2022-10-06.
Faglig foredrag

Maurizi, Marco; Gao, Chao; Berto, Filippo. (2022) Deep-learning-based design of buckling-resistant lattices. ESMC 2022: 11th European solid mechanics conference . ESMC; Galway, Ireland. 2022-07-04 - 2022-07-08.
Faglig foredrag

Wang, Qingbo; Gao, Chao; Berto, Filippo. (2022) Fatigue-resistant notches design based on data-driven approach for addtive manufacturing. 3rd International Workshop on Reliability and Design of Additively Manufactured Materials - RdAMM22 . SIRAMM; Belgrade, Serbia. 2022-10-04 - 2022-10-06.

2021

Vitenskapelig foredrag

bartolucci, beatrice; frasca, francesca; Berto, Filippo; Bertolin, Chiara. (2021) Moisture Content influence on Acoustic Emission Parameters in a drying Scots Pine Log. 3rd National Congress AISAM 2021 - Associazione Italiana di Scienze dell`Atmosfera e Meteorologia . AISAM; L`Aquila. 2021-02-09 - 2021-02-12.
Vitenskapelig foredrag

Bertolin, Chiara; Berto, Filippo; Razavi, Seyed Mohammad Javad; de Ferri, Lavinia; Karvan, Poorya. (2021) Monitoring hygro-mechanical reactions of pine wood by AE, DIC, after environmental changes: a methodological approach. Symbol Final Conference . NTNU; virtual. 2021-10-02 - 2021-10-03.
Vitenskapelig foredrag

califano, america; Foti, Pietro; baiesi, marco; Berto, Filippo; Bertolin, Chiara. (2021) A new Risk assessment tool which assesses the climate-induced mechanical stress and its strain energy density on Pine circular elements: preliminary investigation in view of the experimental and numerical modeling validation. Online Colloquium: Virtual Experiments for Wooden Artwork (VirtEx) . Dresden University; virtual. 2021-11-05 - 2021-11-05.
Faglig foredrag

Celotto, Ambra; Grong, Øystein; Holmestad, Randi; Sørhaug, Jørgen A; Torgersen, Jan; Vullum, Per Erik; Berto, Filippo. (2021) Iterative development of a novel technique for in-situ cold welding of aluminium inside the Focused Ion Beam microscope. 2nd International Conference of Advanced Joining Processes . Universidade do Porto; Sintra, Portugal. 2021-10-21 - 2021-10-22.
Populærvitenskapelig foredrag

Celotto, Ambra; Grong, Øystein; Holmestad, Randi; Sørhaug, Jørgen A; Torgersen, Jan; Vullum, Per Erik; Berto, Filippo. (2021) Preliminary in situ study of FIB-assisted method for aluminium solid-state welding at the microscale. 26th International Conference on Fracture and Structural Integrity . Italian Group of Fracture; Turin. 2021-05-26 - 2021-05-31.
Faglig foredrag

Celotto, Ambra; Grong, Øystein; Holmestad, Randi; Sørhaug, Jørgen A; Torgersen, Jan; Vullum, Per Erik; Berto, Filippo. (2021) Preliminary in situ study of FIB-assisted method for aluminium solid-state welding at the microscale. 26th International Conference on Fracture and Structural Integrity . Italian Group of Fracture; Turin&Web https://www.youtube.com/watch?v=2t_r-BaWwUM&t=4s. 2021-05-26 - 2021-05-31.
Vitenskapelig foredrag

Foti, Pietro; Karvan, Poorya; de Rosa, Andrea; Razavi, Seyed Mohammad Javad; Bertolin, Chiara; Berto, Filippo. (2021) Mechanical properties of Scots pine based on numerical modeling and experiments. Symbol Final Conference . NTNU; virtual. 2021-10-02 - 2021-10-03.
Vitenskapelig foredrag

Grbovic, A; Sedmak, A; Petrovski, B; Sghayer, A; Sedmak, S; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2021) Fatigue crack paths in AA6156 T6 panels with 4 stringers and 3 clips. 7th International Conference on Crack Paths – CP2021 ; 2021-09-21 - 2021-09-24.
Vitenskapelig foredrag

Grong, Øystein; Sandnes, Lise; Berto, Filippo. (2021) Hybrid Metal Extrusion & Bonding (HYB) – mechanical integrity of some similar and dissimilar butt joints produced by HYB. TC18, TC15 and annual DIVK conference . European Structural Integrity Society; Beograd & online. 2021-11-09 - 2021-11-09.
Vitenskapelig foredrag

Karvan, Poorya; Razavi, Seyed Mohammad Javad; Berto, Filippo; Bertolin, Chiara. (2021) Effect of Climate-induced parameters on Fracture properties of semi-circular coated wooden specimens under three-point bending. IGF26 26th International Conference on Fracture and Structural Integrity, Turin, Italy. . Italian Group of Fracture - IGF; Turin. 2021-05-26 - 2021-05-28.
Vitenskapelig foredrag

Milovanovic, A; Milosevic, M; Trajkovic, I; Sedmak, A; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2021) Crack path direction analysis in plane-strain fracture toughness assessment tests of quasi-brittle PLA polymer and ductile PLA-X composite. 7th International Conference on Crack Paths – CP2021 ; 2021-09-21 - 2021-09-24.
Vitenskapelig foredrag

Sepe, Raffaele; Giannella, V; Mazza, P; Armentani, E; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2021) Fatigue fracture tests on Al-Li 2198-T851 specimens under mixed-mode conditions. 7th International Conference on Crack Paths – CP2021 ; 2021-09-21 - 2021-09-24.

2020

Vitenskapelig foredrag

Al Zamzami, I; Razavi, Seyed Mohammad Javad; Berto, Filippo; Susmel, Luca. (2020) The Critical Distance Method to estimate the fatigue strength of notched additively manufactured titanium. 1st Virtual European Conference on Fracture - VECF1 ; 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Bertolin, Chiara; De Ferri, Lavinia; Razavi, Seyed Mohammad Javad; Aalto, P.; Berto, Filippo. (2020) Acoustic Emission NDT for monitoring hygro-mechanical reactions of coated pine wood: a methodological approach. 1st Virtual European Conference on Fracture - VECF1 ; 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Branco, R; Costa, J.D.; Borrego, L.P.; Berto, Filippo; Razavi, Seyed Mohammad Javad; Macek, W. (2020) Multiaxial fatigue life assessment in notched components based on the effective strain energy density. 1st Virtual European Conference on Fracture . European Structural Integrity Society (ESIS); 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Foti, Pietro; Razavi, Seyed Mohammad Javad; Marsavina, Liviu; Berto, Filippo. (2020) Volume Free Strain Energy Density Method for Applications to Blunt V-Notches. 1st Virtual European Conference on Fracture - VECF1 ; 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Gao, Chao; Berto, Filippo. (2020) Biomimetic design on AM components. Fatigue of metallic materials and additively manufactured components ; 2020-11-26 - 2020-11-26.
Vitenskapelig foredrag

Gao, Chao; Kiendl, Josef; Berto, Filippo; Razavi, Seyed Mohammad Javad. (2020) 3D Puzzle-inspired Mechanical Metamaterial with dual Poisson’s ratio. Virtual European Conference on Fracture ; 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Gao, Chao; Kiendl, Josef; Berto, Filippo; Razavi, Seyed Mohammad Javad. (2020) 3D puzzle-inspired metamaterial with dual Poisson’s ratio. Mediterranean Conference on Fracture and Structural Integrity . GSEMM and IGF; Athens. 2020-02-26 - 2020-02-28.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo. (2020) Experimental and theoretical fatigue evaluation of wrought and additively manufactured Ti-6Al-4V. 1st Mediterranean Conference on Fracture and Structural Integrity, MedFract1 . GSEMM and IGF; Athens. 2020-02-26 - 2020-02-28.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo; Gao, Chao. (2020) Effect of build thickness on fatigue behaviour of Ti6Al4V produced by electron beam melting. 1st Virtual European Conference on Fracture - VECF1 ; 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Seibert, Paul; Razavi, Seyed Mohammad Javad; Susmel, Luca; Berto, Filippo; Kastner, Markus. (2020) Validation of the average strain energy density criterion for additively manufactured notched polylactide acid specimens. 1st Virtual European Conference on Fracture - VECF1 . European Structural Integrity Society (ESIS); 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Valean, C; Marsavina, Liviu; Marghitas, M; Linul, E; Razavi, Seyed Mohammad Javad; Berto, Filippo; Brighenti, Roberto. (2020) The effect of crack insertion for FDM printed PLA materials on Mode I and Mode II fracture toughness. 1st Virtual European Conference on Fracture - VECF1 ; 2020-06-29 - 2020-07-01.
Vitenskapelig foredrag

Wang, Qingbo; Berto, Filippo; Gao, Chao. (2020) Data-driven approach to design fatigue resistant structures. Nasjonal konferanse for materialteknologi ; 2020-12-02 - 2020-12-03.
Vitenskapelig foredrag

Wang, Qingbo; Berto, Filippo; Gao, Chao. (2020) Data-driven approach to design fatigue-resistant notched structures. Virtual European Conference on Fracture ; 2020-06-29 - 2020-07-01.

2019

Poster

Bergh, Tina; Sandnes, Lise; Mathiasson, Marie; Johnstone, Duncan; Midgley, Paul A.; Berto, Filippo; Holmestad, Randi; Grong, Øystein; Vullum, Per Erik. (2019) Interface Microstructural Characterisation of Hybrid Metal Extrusion & Bonding Aluminium-Steel Joints. EMAG MMC ; 2019-07-01 - 2019-07-04.
Vitenskapelig foredrag

Berto, Filippo; Fatemi, Ali; Shamsaei, Nima; Razavi, Seyed Mohammad Javad. (2019) Multiaxial Fatigue Analysis of Additively Manufactured 17-4 PH Stainless Steel Notched Specimens. 2019 TMS Annual Meeting & Exhibition ; San Antonio, Texas. 2019-04-10 - 2019-04-14.
Poster

Bertolin, Chiara; De Ferri, Lavinia; Berto, Filippo. (2019) AM applications in Heritage Science: is AM the new frontier for creating mock-up samples with similar properties as aged materials?. ESIAM 2019 1st european conference on structural integrity of additively manufactured materials . ESIS - European structural integrity society; trondheim. 2019-09-09 - 2019-09-11.
Vitenskapelig foredrag

Bertolin, Chiara; De Ferri, Lavinia; grottesi, giulia; Berto, Filippo; Aalto, P.. (2019) Measuring protocol in coupling tests on wood using the Acoustic Emission NDT. Shatis 2019 – 5th international conference on structural health assessment of timber structure . university of minho; Guimaraes. 2019-09-25 - 2019-09-27.
Vitenskapelig foredrag

Gao, Chao; Kiendl, Josef; Berto, Filippo; Razavi, Seyed Mohammad Javad. (2019) 3D puzzle-inspired metamaterial with negative Poisson’s ratio. 1st European conference on structural integrity of additively manufactured materials ; Trondheim. 2019-09-09 - 2019-09-11.
Vitenskapelig foredrag

Gao, Chao; Kiendl, Josef; Berto, Filippo; Razavi, Seyed Mohammad Javad. (2019) 3D puzzle-inspired metamaterial with negative Poisson’s ratio. Society of engineering science 56th annual technical meeting ; Washington University in St. Louis. 2019-10-13 - 2019-10-15.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Bagherifard, S; Guagliano, Mario; Riccio, M; Berto, Filippo. (2019) Effect of heat treatment on fatigue behavior of notched aluminum specimens made by PBF technology. First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19) ; Trondheim. 2019-09-09 - 2019-09-11.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo. (2019) AM vs wrought: Ti-6Al-4V. First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19) ; Trondheim. 2019-09-09 - 2019-09-11.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo. (2019) Geometry and scale effect on the structural integrity of AM parts. Additive Manufacturing workshop – The process chain, from designers to end-users . University of Trento; Rovereto. 2019-07-18.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo. (2019) Geometry and thickness effect on mechanical properties of EBM Ti6Al4V alloy under static and fatigue loading. First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19) ; Trondheim. 2019-09-09 - 2019-09-11.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Hokstad, Haakon Lie; Berto, Filippo. (2019) Mixed mode I/II/III fracture assessment of PMMA using a new test fixture. 12th international conference on multiaxial fatigue and fracture ; Bordeaux. 2019-06-24 - 2019-06-26.
Vitenskapelig foredrag

Rølvåg, Terje; Haugen, Bjørn; Bella, Matteo; Berto, Filippo. (2019) Fatigue Analysis of High Performance Race Engines. ICSID 2019 3rd International Conference on Structural Integrity and Durability . University of Zagreb, Faculty of Mechanical Engineering and; Dubrovnik. 2019-06-04 - 2019-06-07.
Vitenskapelig foredrag

Solberg, Klas; Berto, Filippo. (2019) On predicting fatigue initiation site in components produced by selective laser melting. The First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19) . NTNU; Trondheim. 2019-09-09 - 2019-09-11.
Vitenskapelig foredrag

Susmel, L; Al Zamzami, I; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2019) Material characteristic lengths to design 3D-printed notched titanium against fatigue. First European Conference on Structural Integrity of Additively Manufactured Materials (ESIAM19) ; Trondheim. 2019-09-09 - 2019-09-11.

2018

Vitenskapelig foredrag

Ayatollahi, Majid reza; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2018) Crack path stability in brittle fracture under pure mode I loading. ECF22 - Loading and Environmental effects on Structural Integrity . ESIS; Metropol Palace, Bulevar Kralja Aleksandra 69, Belgrade. 2018-08-26 - 2018-08-31.
Vitenskapelig foredrag

Berto, Filippo; Fatemi, Ali; Shamsaei, Nima; Razavi, Seyed Mohammad Javad. (2018) Fatigue Assessment of 17-4 PH Stainless Steel Notched Specimens Made by Direct Metal Laser Sintering. ASTM Symposium on Structural Integrity of Additive Manufactured Parts . ASTM; Washington, DC. 2018-11-06 - 2018-11-08.
Vitenskapelig foredrag

Malikova, Lucie; Razavi, Seyed Mohammad Javad; Berto, Filippo. (2018) Crack propagation in a brittle DCB specimen assessed by means of the Williams’ power expansion. 6th International Conference on Crack Paths (CP 2018) ; Verona, Italy. 2018-09-19 - 2018-09-21.
Faglig foredrag

Peron, Mirco; Torgersen, Jan; Berto, Filippo. (2018) Tensile and fatigue behavior of PEEK by means of the local strain energy density. The 6th International Conference on Crack Paths ; 2018-09-19 - 2018-09-21.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Ayatollahi, Majid reza; Berto, Filippo. (2018) Assessment of fatigue crack growth behavior of cracked specimens repaired by indentation. ECF22 - Loading and Environmental effects on Structural Integrity . ESIS; Metropol Palace, Bulevar Kralja Aleksandra 69, Belgrade. 2018-08-26 - 2018-08-31.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo. (2018) Multiaxial fatigue behavior of severely notched Ti–6Al–4V specimens. Nasjonal konferanse for materialteknologi 2018 ; Oslo. 2018-05-30 - 2018-05-31.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo. (2018) Structural integrity of additively manufactured components – an introduction. ECF22 - Loading and Environmental effects on Structural Integrity . ESIS; Metropol Palace, Bulevar Kralja Aleksandra 69, Belgrade. 2018-08-26 - 2018-08-31.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo; Ayatollahi, Majid reza. (2018) ASSESSMENT OF MIXED-MODE FATIGUE CRACK GROWTH UNDER BIAXIAL LOADING USING AN ITERATIVE METHOD. 2nd International Conference on Structural Integrity and Durability (ICSID 2018) . ESIS; Dubrovnik. 2018-10-02 - 2018-10-05.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Berto, Filippo; Ayatollahi, Majid reza; Shahmohammadi, Mohammad. (2018) Assessment of the geometry effect on fracture behavior of V-notched specimens. 6th International Conference on Crack Paths (CP 2018) ; Verona, Italy. 2018-09-19 - 2018-09-21.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Majidi, Hamid reza; Berto, Filippo. (2018) BRITTLE FRACTURE PREDICTION OF KEY-HOLE NOTCHED SPECIMENS BY MEANS OF J-INTEGRAL EXPRESSION. 2nd International Conference on Structural Integrity and Durability (ICSID 2018) . ESIS; Dubrovnik. 2018-10-02 - 2018-10-05.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Majidi, Hamid reza; Berto, Filippo; Ayatollahi, Majid reza. (2018) FRACTURE ASSESSMENT OF U-NOTCHED GRAPHITE SPECIMENS BY MEANS OF COHESIVE ZONE MODEL. 2nd International Conference on Structural Integrity and Durability (ICSID 2018) . ESIS; Dubrovnik. 2018-10-02 - 2018-10-05.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Scott Bale, Emil; Berto, Filippo. (2018) METALLIC FIBER-REINFORCED ADHESIVELY BONDED JOINTS: DYNAMIC LOADING. 2nd International Conference on Structural Integrity and Durability (ICSID 2018) . ESIS; Dubrovnik. 2018-10-02 - 2018-10-05.
Vitenskapelig foredrag

Razavi, Seyed Mohammad Javad; Scott Bale, Emil; Berto, Filippo. (2018) METALLIC FIBER-REINFORCED ADHESIVELY BONDED JOINTS: FATIGUE BEHAVIOUR. 2nd International Conference on Structural Integrity and Durability ; 2018-10-02 - 2018-10-05.
Vitenskapelig foredrag

Sandnes, Lise; Berto, Filippo; Grong, Øystein; Torgersen, Jan. (2018) Using the Hybrid Metal Extrusion & Bonding (HYB) Process for Butt Welding of 4 mm plates of AA6082-T6. 5th International Conference of Engineering Against Failure (ICEAF V) ; 2018-06-20 - 2018-06-22.
Poster

Sandnes, Lise; Grong, Øystein; Berto, Filippo; Filippo, Abbatinali; Matteo, Manfrotto. (2018) Exploring the Hybrid Metal Extrusion & Bonding (HYB) Process for Dissimilar Joining of Aluminium Alloy 6082-T6 and Structural Steel 355. 2nd International Conference on Structural Integrity and Durability . ESIS (European Structural Integrity Society); Dubrovnik. 2018-10-02 - 2018-10-05.
Vitenskapelig foredrag

Solberg, Klas; Berto, Filippo; Torgersen, Jan. (2018) Fatigue Strength of Semi-circular Notched Inconel 718 Samples Produced by Selective Laser Melting. Nasjonal Konferanse for Materialteknologi ; 2018-05-29 - 2018-05-31.
Vitenskapelig foredrag

Solberg, Klas; Torgersen, Jan; Berto, Filippo. (2018) Fatigue Behaviour of Additively Manufactured Inconel 718 Produced by Selective Laser Melting. 22nd European Conference of Fracture ; 2018-08-25 - 2018-08-31.
Vitenskapelig foredrag

Solberg, Klas; Torgersen, Jan; Berto, Filippo. (2018) Notched Fatigue Behaviour of Inconel 718 Analysed by Critical Strain Energy Density. 2nd International Conference on Structural Integrity and Durability ; Dubriwnik. 2018-10-01 - 2018-10-06.
Poster

Viespoli, Luigi Mario; Alvaro, Antonio; Nyhus, Bård; Berto, Filippo. (2018) LOCAL STRAIN ENERGY FATIGUE PREDICTION OF ALUMINUM DOUBLE-V BUTT-JOINTS. ICSID 2018 ; 2018-10-02 - 2018-10-05.
Poster

Viespoli, Luigi Mario; Alvaro, Antonio; Nyhus, Bård; Johanson, Audun; Berto, Filippo. (2018) FATIGUE BEHAVIOR OF NOTCHED LEAD: EXPERIMENTAL AND NUMERICAL STRAIN DISTRIBUTION. ICSID 2018 ; 2018-10-02 - 2018-10-05.

2017

Vitenskapelig foredrag

Gallo, P.; Sumigawa, T.; Kitamura, T.; Berto, Filippo. (2017) Fracture mechanics at nano-scale: applicability of the Strain Energy Density. Fatigue 2017 ; 2017-07-03 - 2017-07-05.
Vitenskapelig foredrag

Morishita, T.; Itoh, T.; Gallo, P.; Berto, Filippo; Bressan, S.. (2017) Multiaxial Low Cycle Fatigue Analysis of Notched Specimen for Type 316L Stainless Steel under Non-Proportional Loading. Fatigue 2017 ; 2017-07-03 - 2017-07-05.

2016

Vitenskapelig foredrag

Berto, Filippo; Campagnolo, A.; Ayatollahi, M.; Barnoush, A.. (2016) Fracture assessment of graphite components weakened by rounded V-notches and subjected to static multiaxial loading. 21st European Conference on Fracture (ECF21) ; 2016-06-20 - 2016-06-24.
Vitenskapelig foredrag

Berto, Filippo; Campagnolo, A.; Chebat, F.; Cincera, M.; Welo, Torgeir. (2016) Modelling and fatigue assessment of steel rollers with failure occurring at the weld root based on the local strain energy. 21st European Conference on Fracture (ECF21) ; 2016-06-20 - 2016-06-24.
Vitenskapelig foredrag

Berto, Filippo; Campagnolo, A.; Meneghetti, G.; Tanaka, K.. (2016) Averaged strain energy density-based synthesis of crack initiation life in notched steel bars under torsional fatigue. 11th International Conference on Multiaxial Fatigue & Fracture (ICMFF11) ; 2016-06-01 - 2016-06-03.
Vitenskapelig foredrag

Berto, Filippo; Campagnolo, A.; Meneghetti, G.; Tanaka, K.. (2016) Synthesis of crack initiation life in steel notched specimens under torsional fatigue based on the averaged strain energy density. 21st European Conference on Fracture (ECF21) ; 2016-06-20 - 2016-06-24.
Vitenskapelig foredrag

Berto, Filippo; Campagnolo, A.; Welo, T.. (2016) Multiaxial fatigue strength of severely notched titanium alloy for aerospace applications: a review of recent data. 11th International Conference on Multiaxial Fatigue & Fracture (ICMFF11) ; 2016-06-01 - 2016-06-03.
Vitenskapelig foredrag

Campagnolo, A.; Berto, Filippo; leguillon, D.. (2016) Mode II loading in sharp V-notched components: a comparison among some recent criteria for brittle fracture assessment. 1st European Conference on Fracture (ECF21) ; 2016-06-20 - 2016-06-25.
Vitenskapelig foredrag

Moiseenko, D.D.; Panin, S.V.; Maksimov, P.V.; Panin, V.E.; Berto, Filippo. (2016) Behavior of nanoporous thermal barrier coatings under cyclic thermal loading. AIP Conference Proceedings ; 2016-06-28 - 2016-06-30.
Vitenskapelig foredrag

Pittarello, L.; Campagnolo, A.; Berto, Filippo. (2016) NSIFs estimation based on the averaged strain energy density under in-plane mixed mode loading. 21st European Conference on Fracture (ECF21) ; 2016-06-20 - 2016-06-24.
Vitenskapelig foredrag

Pook, L.; Berto, Filippo; Campagnolo, A.. (2016) Coupled fracture modes under anti-plane loading. 11th International Conference on Multiaxial Fatigue & Fracture (ICMFF11) ; 2016-06-01 - 2016-06-03.

Språkvelger

Filippo Berto

Filippo Berto

Om

General information

Current research topics

Main courses

Previous courses

Responsible for Erasmus flux with University of Padua, University of Parma, University of Madrid, University of Bologna and University of Messina. He is responsible for the international relationship between MTP and the University of Kyoto, Aalto University and Southampton University.

Editorial and communication activities

International links

Awards

Industry collaboration and projects

Membership

Dr. Berto has graduated more than 20 PhDs students as main supervisor.

Kompetanseord

Publikasjoner

2023

2022

2021

2020

2018

2017

2016

Tidsskriftspublikasjoner

Del av bok/rapport

Undervisning

Emner

Formidling

2022

2021

2020

2019

2018

2017

2016