Description

Malvern Panalytical Empyrean model (from 2026) with CuKα radiation (i.e. wavelength of 1.54 Å). More information here.

  • Bragg-Brentano geometry and transmission geometry.
  • θ–2θ operating mode

Incident beam optics: 
  • iCore (Motorized divergence slit, mask, mirror, attenuators, soller slit)
  • Monochromator (select one wavelength)
Diffracted beam optics:
  • dCore (anti-scatter slit, collimator, soller slit)
  • Programmable anti-scatter slit
  • Detector arm 1 : 1Der (well suited for all standard XRD and fluorescent samples) 
  • Detector arm 2:  PIXcell2D  (0D,1D,2D scanning and static modes)

Sample stages:
  • Cradle XYZ
  • Spinner stage with 45 position sample holder.
  • XYZ table 
Well suited for:
  • Powders, solids, thin films
  • Routine XRD, GIXRD
  • Useful if you wish to measure your samples straight after production etc. 
  • For quantification of the phases in the sample using Rietveld refinement.
  • Good for fluorescent samples (samples containing high amounts of Fe, Co, Mn ) using a 1Der detector.
  • HR-XRD, XRR, RSM for thin films using the Cradle XYZ.
  • Texture and residual stress for solid samples using the cradle XYZ.
  • Sample mapping using the XYZ table and micro-diffraction mode (smallest beam spot at sample position is 400 µm x 500 µm)
  • Low angle measurement from 0.3 deg, using the special low angle sample holder.



Before you begin

Equipment can not be used without training. See XRD-lab info.

Booking the instrument

Use the booking system.


Relevant links:
  • No labels