Publikasjoner

Aasheim, Erlend Eithun. On Dynamic Response Analysis of Fixed Offshore Wind Turbines - Aerodynamic Damping in General FEM Codes. I: Computational Methods in Marine Engineering III Marine 2009. International Center for Numerical Methods in Engineering (CIMNE) 2009 ISBN 978-84-96736-66-5. s. 195-198 NTNU

Achani, Dasharatha; Hopperstad, Odd Sture; Lademo, Odd-Geir. Behaviour of extruded aluminium alloys under proportional and non-proportional strain paths. Journal of Materials Processing Technology 2009 ;Volum 209.(10) s. 4750-4764 NTNU

 Achani, Dasharatha; Hopperstad, Odd Sture; Lademo, Odd-Geir. Influence of advanced yield criteria on predictions of plastic anisotropy for aluminium alloy sheets. International Journal of Material Forming 2009 ;Volum 2. Suppl. 1 s. 487-490 NTNU

Alsos, Hagbart Skage; Amdahl, Jørgen; Hopperstad, Odd Sture. On the resistance to penetration of stiffened plates, Part II: Numerical analysis. International Journal of Impact Engineering 2009 ;Volum 36.(7) s. 875-887 NTNU

Angst, Ueli; Elsener, Bernhard; Larsen, Claus Kenneth; Vennesland, Øystein. Critical chloride content in reinforced concrete – A review. Cement and Concrete Research 2009 ;Volum 39.(12) s. 1122-1138 NTNU

Angst, Ueli; Vennesland, Øystein. Detecting critical chloride content in concrete using embedded ion selective electrodes – effect of liquid junction and membrane potentials. Materials and corrosion - Werkstoffe und Korrosion 2009 ;Volum 60.(8) s. 638-643 NTNU

Angst, Ueli; Vennesland, Øystein; Myrdal, Roar. Diffusion potentials as source of error in electrochemical measurements in concrete. Materials and Structures 2009 ;Volum 42.(3) s. 365-375 NTNU

Berg, Espen; Holthe, Kjell H.; Skallerud, Bjørn Helge. Cyclic plasticity modelling for ANDES thin shell and line-spring finite elements. International Journal of Applied Mechanics 2009 ;Volum 1.(1) s. 201-233 NTNU

Børvik, Tore; Dey, Sumita; Hopperstad, Odd Sture; Langseth, Magnus. On the main mechanisms in ballistic perforation of steel plates at sub-ordnance impact velocities. I: Predictive modeling of dynamic processes. Springer 2009 ISBN 978-1-4419-0728-8. s. 189-219 NTNU

  Børvik, Tore; Hanssen, Arve Grønsund; Langseth, Magnus; Olovsson, Lars. Response of structures to planar blast loads - A finite element engineering approach. Computers & structures 2009 ;Volum 87.(9-10) s. 507-520 NTNU

 Chen, Yan; Clausen, Arild Holm; Hopperstad, Odd Sture; Langseth, Magnus. Stress-strain behaviour of aluminium alloys at a wide range of strain rates. International Journal of Solids and Structures 2009 ;Volum 46.(21) s. 3825-3835 NTNU

 Chen, Yan; Hopperstad, Odd Sture; Clausen, Arild Holm; Børvik, Tore; Berstad, Torodd. Finite element analyses of Charpy tests on extruded aluminium alloys. I: DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Material under Dynamic Loading. Volume 2/2. EDP Sciences 2009 ISBN 978-2-7598-0473-3. s. 1767-1773 NTNU

 Chen, Yan; Pedersen, Ketill Olav; Clausen, Arild Holm; Hopperstad, Odd Sture. An experimental study on the dynamic fracture of extruded AA6xxx and AA7xxx aluminium alloys. Materials Science & Engineering: A 2009 ;Volum 523.(1-2) s. 253-262 NTNU

 Clausen, Arild Holm; Polanco-Loria, Mario A.; Moura, Rafael Traldi; Alves, Marcilio; Berstad, Torodd; Langseth, Magnus; Hopperstad, Odd Sture. Polymer plates subjected to impact: Experimental tests and numerical simulations. I: DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Material under Dynamic Loading. Volume 2/2. EDP Sciences 2009 ISBN 978-2-7598-0473-3. s. 1537-1543 NTNU

 Dahl, Kristian B.; Malo, Kjell A. Planar Strain Measurements on Wood Specimens. Experimental mechanics 2009 ;Volum 49.(4) s. 575-586 NTNU

 Dahl, Kristian B; Malo, Kjell A. Linear shear properties of spruce softwood. Wood Science and Technology 2009 ;Volum 43.(5-6) s. 499-525 NTNU

 Dahl, Kristian B; Malo, Kjell A. Nonlinear shear properties of spruce softwood: experimental results. Wood Science and Technology 2009 ;Volum 43.(7-8) s. 539-558 NTNU

 Dahl, Kristian B; Malo, Kjell A. Nonlinear shear properties of spruce softwood: Numerical analyses of experimental results. Composites Science And Technology 2009 ;Volum 69.(13) s. 2144-2151 NTNU

 Dahl, Sigrid Kaarstad; Vierendeels, Jan; Degroote, Joris; Annerel, Sebastian; Skallerud, Bjørn Helge; Hellevik, Leif Rune. Implicit interaction of two rigid mitral leaflets i a partitioned fluid-structure approach. I: MekIT'09 : Fifth National Conference on Computational Mechanics, Trondheim 26-27 May 2009. Tapir Akademisk Forlag 2009 ISBN 978-82-519-2421-4. s. 135-149 NTNU

 Dumoulin, Stephane C.; Hopperstad, Odd Sture; Berstad, Torodd. Investigation of integration algorithms for rate-dependent crystal plasticity using explicit finite element codes. Computational materials science 2009 ;Volum 46.(4) s. 785-799 NTNU

 Dørum, Cato; Hopperstad, Odd Sture; Berstad, Torodd; Dispinar, D. Numerical modelling of magnesium die-castings using stochastic fracture parameters. Engineering Fracture Mechanics 2009 ;Volum 76.(14) s. 2232-2248 NTNU

 Dørum, Cato; Laukli, Hans Ivar; Hopperstad, Odd Sture. Through-process numerical simulations of the structural behaviour of Al-Si die-castings. Computational materials science 2009 ;Volum 46.(1) s. 100-111 NTNU

 Gjørv, Odd E.. Advances in durability design and performance-based specification. I: Concrete durability. Thomas Telford 2009 ISBN 978-0-7277-3517-1. s. 546-561 NTNU

 Gjørv, Odd E.. Durability design of concrete structures in severe environments. Taylor & Francis 2009 (ISBN 9780415414081) 232 s. NTNU

 Hagen, N.C.; Larsen, Per Kristian. Shear capacity of steel plate girders with large web openings, Part II: Design guidelines. Journal of constructional steel research 2009 ;Volum 65.(1) s. 151-158 NTNU

 Hagen, N.C.; Larsen, Per Kristian; Aalberg, Arne. Shear capacity of steel plate girders with large web openings, Part I: Modeling and simulations. Journal of constructional steel research 2009 ;Volum 65.(1) s. 142-150 NTNU

 He, Jianying; Helland, Tore; Zhang, Zhiliang; Kristiansen, H. Fracture of micrometre-sized Ni/Au coated polymer particles. Journal of Physics D: Applied Physics 2009 ;Volum 42.(8) s. 085405- NTNU

 He, Jianying; Zhang, Zhiliang; Kristiansen, H. Compression properties of individual micron-sized acrylic particles. Materials letters (General ed.) 2009 ;Volum 63.(20) s. 1696-1698 NTNU

 He, Jianying; Zhang, Zhiliang; Kristiansen, H. Nanomechanical Characterization of Single Micron-Sized Polymer Particles. Journal of Applied Polymer Science 2009 ;Volum 113.(3) s. 1398-1405 NTNU

 Hellevik, Leif Rune; Vierendeels, Jan; Kiserud, Torvid; Stergiopulos, Nikos; Irgens, Fridtjov; Dick, Erik; Riemslagh, Kris; Verdonck, Pascal. An assessment of ductus venosus tapering and wave transmission from the fetal heart. Biomechanics and Modeling in Mechanobiology 2009 ;Volum 8.(6) s. 509-517 NTNU

 Hoang, Nguyen Hieu; Porcaro, Raffaele; Langseth, Magnus; Hanssen, Arve Grønsund. Self-piercing riveting of two aluminium alloy sheets using an aluminium rivet. I: MekIT'09 : Fifth National Conference on Computational Mechanics, Trondheim 26-27 May 2009. Tapir Akademisk Forlag 2009 ISBN 978-82-519-2421-4. s. 205-213 NTNU

 Høiseth, Karl Vincent. Konstruksjonsprinsipper. I: Norsk murarkitektur. Gyldendal Akademisk 2009 ISBN 978-82-05-39081-2. s. 46-53 NTNU

 Høyland, Knut Vilhelm; Gabrielsen, Magnus; Moslet, Per Olav; Sæbø, Are Opstad. Relaxation Tests and Young's Modulus. Proceedings - International Conference on Port and Ocean Engineering under Arctic Conditions 2009 s. - NTNU

 Irgens, Fridtjov. Non-Linear Continuum Mechanics and Constitutive modelling. I: MekIT'09 : Fifth National Conference on Computational Mechanics, Trondheim 26-27 May 2009. Tapir Akademisk Forlag 2009 ISBN 978-82-519-2421-4. s. 47-76 NTNU

 Jacobsen, Stefan; Haugan, Lars; Hammer, Tor Arne; Kalogiannidis, Evangelos. Flow conditions of fresh mortar and concrete in different pipes. Cement and Concrete Research 2009 ;Volum 39.(11) s. 997-1006 NTNU

 Johannessen, Rolf; Oldervoll, Frøydis; Kristiansen, Helge; Tyldum, Hallvard; Nguyen, Hoang-Vu; Aasmundtveit, Knut Eilif. Investigation of Compliant Interconnect for Ball Grid Array (BGA). I: Microelectronics and Packaging Conference, 2009. EMPC 2009. European. IEEE conference proceedings 2009 ISBN 9781424447220. s. - NTNU

 Kane, Alexandre; Børvik, Tore; Hopperstad, Odd Sture; Langseth, Magnus. Finite Element Analysis of Plugging Failure in Steel Plates Struck by Blunt Projectiles. Journal of applied mechanics 2009 ;Volum 76.(5) Suppl. 051302 s. - NTNU

 Kristiansen, Helge; Whalley, David; Tyldum, Hallvard; Redford, Keith. Characterisation of Metal Coated Polymer Balls for BGA and CSP Applications. Electronic Components and Technology 2009 s. 1563-1568 NTNU

 Lademo, Odd-Geir; Engler, Olaf; Keller, S; Berstad, Torodd; Pedersen, Ketill Olav; Hopperstad, Odd Sture. Identification and validation of constitutive model and fracture criterion for AlMgSi alloy with application to sheet forming. Materials & design 2009 ;Volum 30.(8) s. 3005-3019 NTNU

 Lee, Siaw Foon; He, Jianying; wang, xiao hui; Zhang, Zhiliang; Jacobsen, Stefan. Study of P-h Curves on Nanomechanical Properties of Steel Fiber Reinforced Mortar. I: Nanotechnology in Construction: Proceedings of the NICOM3. Springer 2009 ISBN 3642009794. s. 281-286 NTNU

 Leinan, Paul Roger; Hellevik, Leif Rune; Prot, Victorien Emile; Kiserud, Torvid; Skallerud, Bjørn Helge. On material modelling of umbilical vein. I: MekIT'09 : Fifth National Conference on Computational Mechanics, Trondheim 26-27 May 2009. Tapir Akademisk Forlag 2009 ISBN 978-82-519-2421-4. s. 281-295 NTNU

 Lilledahl, Magnus Borstad; Skallerud, Bjørn Helge; Davies, Catharina De Lange. Mechanical properties of tissue determined by multiphoton microscopy. Proceedings of SPIE, the International Society for Optical Engineering 2009 ;Volum 7183. s. 718325- NTNU

 Lou, D.C.; Solberg, Jan Ketil; Børvik, Tore. Surface strengthening using a self-protective diffusion paste and its application for ballistic protection of steel plates. Materials & design 2009 ;Volum 30.(9) s. 3525-3536 NTNU

 Lunde, Knut Birger; Skallerud, Bjørn Helge. The modified cam clay model for constrained compression of human morsellised bone: Effects of porosity on the mechanical behaviour. Journal of The Mechanical Behavior of Biomedical Materials 2009 ;Volum 2.(1) s. 43-50 NTNU

 Macdonald, KA; Haagensen, Per Jahn. Fatigue of welded aluminium hollow section profiles. Engineering Failure Analysis 2009 ;Volum 16.(1) s. 254-261 NTNU

 Manes, A.; Porcaro, Raffaele; Børvik, Tore; Langseth, Magnus; Ilstad, Håvar. Calibration of a Constitutive Material Model for Sub-Sea Pipelines. I: Computational Methods in Marine Engineering III Marine 2009. International Center for Numerical Methods in Engineering (CIMNE) 2009 ISBN 978-84-96736-66-5. s. 317-320 NTNU

 Moe, Heidi; Gaarder, RH; Olsen, Anna; Hopperstad, Odd Sture. Resistance of aquaculture net cage materials to biting by Atlantic Cod (Gadus morhua). Aquacultural Engineering 2009 ;Volum 40.(3) s. 126-134 NTNU

 Moe, Heidi; Hopperstad, Odd Sture; Ivanova, Anna; Jensen, Østen; Fredheim, Arne. Temporary-creep and post-creep properties of aquaculture netting materials. Ocean Engineering 2009 ;Volum 36.(12-13) s. 992-1002 NTNU

 Moura, Rafael Traldi; Clausen, Arild Holm; Langseth, Magnus; Alves, Marcilio. Dynamic mechanical behaviour of polyethylene. I: DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Material under Dynamic Loading. Volume 1/2. EDP Sciences 2009 ISBN 978-2-7598-0472-6. s. 497-502 NTNU

 Nyhus, Bård; Østby, Erling; Zhang, Zhiliang; Olsø, Erlend; Røstadsand, Per Arne; Eikrem, Pål Are. Large Scale Tests of Strain Capacity of Pipe Sections With Circumferential Defects Subjected to Installation-Induced Plastic Strain History. I: Proceedings of the ASME 28th International Conference on Ocean, Offshore and Arctic Engineering - OMAE2009. ASME Press 2009 ISBN 978-0-7918-3844-0. s. - NTNU

Pettersen, Sune Hansborg; Aamodt, Arild; Foss, Olav Andreas; Skallerud, Bjørn Helge. Subject specific finite element analysis of a callus distraction - a preliminary study. I: MekIT'09 : Fifth National Conference on Computational Mechanics, Trondheim 26-27 May 2009. Tapir Akademisk Forlag 2009 ISBN 978-82-519-2421-4. s. 371-383 NTNU

 Pettersen, Sune Hansborg; Wik, Tina Strømdal; Skallerud, Bjørn Helge. Subject specific finite element analysis of implant stability for a cementless femoral stem. Clinical Biomechanics 2009 ;Volum 24.(6) s. 480-487 NTNU

 Pettersen, Sune Hansborg; Wik, Tina Strømdal; Skallerud, Bjørn Helge. Subject specific finite element analysis of stress shielding around a cementless femoral stem. Clinical Biomechanics 2009 ;Volum 24.(2) s. 196-202 NTNU

 Prot, Victorien Emile; Haaverstad, Rune; Skallerud, Bjørn Helge. Finite element analysis of the mitral apparatus: annulus shape effect and chordal force distribution. Biomechanics and Modeling in Mechanobiology 2009 ;Volum 8.(1) s. 43-55 NTNU

 Prot, Victorien Emile; Skallerud, Bjørn Helge. Nonlinear solid finite element analysis of mitral valves with heterogeneous leaflet layers. Computational Mechanics 2009 ;Volum 43.(3) s. 353-368 NTNU

 Ren, Xiaobo; Zhang, Zhiliang; Nyhus, Bård. Effect of residual stresses on the crack-tip constraint in a modified boundary layer model. International Journal of Solids and Structures 2009 ;Volum 46.(13) s. 2629-2641 NTNU

 Sengul, Ozkan; Gjørv, Odd E.. Effect of Embedded Steel on Electrical Resistivity Measurements on Concrete Structures. ACI Materials Journal 2009 ;Volum 106.(1) s. 11-18 NTNU

 Shang, Ling Yun; Zhang, Zhiliang; Skallerud, Bjørn Helge. Comments on the evaluation of the stress intensity factor for a general re-entrant corner in anisotropic bi-materials. Engineering Fracture Mechanics 2009 ;Volum 76.(9) s. 1373-1379 NTNU

 Shang, Ling Yun; Zhang, Zhiliang; Skallerud, Bjørn Helge. Evaluation of fracture mechanics parameters for free edges in multi-layered structures with weak singularities. International Journal of Solids and Structures 2009 ;Volum 46.(5) s. 1134-1148 NTNU

 Skallerud, Bjørn Helge; Berg, Erik; Holthe, Kjell H.. A Numerical Approach to Analyse very low Cycle Fatigue Crack Growth in Pipelines. I: Computational Methods in Marine Engineering III Marine 2009. International Center for Numerical Methods in Engineering (CIMNE) 2009 ISBN 978-84-96736-66-5. s. 313-316 NTNU

 Tarigopula, Venkatapathi; Albertini, Carlo; Langseth, Magnus; Hopperstad, Odd Sture; Clausen, Arild Holm. A hydro-pneumatic machine for intermediate strain-rates: Set-up, tests and numerical simulations. I: DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Material under Dynamic Loading. Volume 1/2. EDP Sciences 2009 ISBN 978-2-7598-0472-6. s. 381-387 NTNU

 Tarigopula, Venkatapathi; Hopperstad, Odd Sture; Clausen, Arild Holm; Langseth, Magnus. Effect of pre-straining on localisation and fracture of dual-phase steel at elevated rates of strain. I: DYMAT 2009 - 9th International Conference on the Mechanical and Physical Behaviour of Material under Dynamic Loading. Volume 1/2. EDP Sciences 2009 ISBN 978-2-7598-0472-6. s. 801-807 NTNU

 Tarigopula, Venkatapathi; Hopperstad, Odd Sture; Langseth, Magnus; Clausen, Arild Holm. An evaluation of a combined isotropic-kinematic hardening model for representation of complex strain-path changes in dual-phase steel. European journal of mechanics. A, Solids 2009 ;Volum 28.(4) s. 792-805 NTNU

 Vikan, Hedda Vestøl; Jacobsen, Stefan; Haugan, Lars. Rheology and pumpability of mortar. I: Rheology of Cement Suspensions such as Fresh Concrete. Rilem publications 2009 ISBN 978-2-35158-091-2. s. 88-96 NTNU

 Wang, Xiao Hui; Jacobsen, Stefan; He, Jianying; Zhang, Zhiliang; Lee, Siaw Foon; Lein, Hilde Lea. Application of nanoindentation testing to study of the interfacial transition zone in steel fiber reinforced mortar. Cement and Concrete Research 2009 ;Volum 39.(8) s. 701-715 NTNU

 Westermann, Ida; Hopperstad, Odd Sture; Marthinsen, Knut; Holmedal, Bjørn. Ageing and work-hardening behaviour of a commercial AA7108 aluminium alloy. Materials Science & Engineering: A 2009 ;Volum 524.(1-2) s. 151-157 NTNU

 Westermann, Ida; Hopperstad, Odd Sture; Marthinsen, Knut; Holmedal, Bjørn. Work- and age-hardening behaviour of a commercial AA7108 aluminium alloy. Materials Science Forum 2009 ;Volum 618-619. s. 555-558 NTNU

 Zhang, Zhiliang; Wachenfeldt, Bjørn Jenssen. Numerical study on the heat storing capacity of concrete walls with air cavities. Energy and Buildings 2009 ;Volum 41.(7) s. 769-773 NTNU

 Zhao, Junhua. Three-parameter approach for elastic-plastic stress field of an embedded elliptical crack. Engineering Fracture Mechanics 2009 ;Volum 76.(16) s. 2429-2444 NTNU

 Zhao, Junhua; Zhou, Bin; Liu, Baiguo; Guo, Wanlin. Elasticity of Single-Crystal Calcite by First-Principles Calculations. Journal of Computational and Theoretical Nanoscience 2009 ;Volum 6.(5) s. 1181-1188 NTNU